Progress is slow but I am getting somewhere. Lots of family stuff going on.
So I had a really hard time getting the starter off the truck to pull the engine. When I installed it at the campground the bolts pulled it into the hole. Good thing I didn't have to take it back out. I literally beat on it with my rubber hammer for an hour before I got it to move. Trying not to destroy it. So I decided to address that before reinstall. I had hoped it was just paint but it required a little more 80 grit love than that but it just almost drops in flat now.
You must be registered for see images attach
I'm pretty much done with assembly.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Need the other half of the motor mounts bolted on. I mocked all the othe accessories and somehow I have lost my first bolt. It's the bolt that the PS pivots on. Of course it's 7/16 and not a 3/8 that I have extras of. [emoji849]
Anyway, probably not going to get it stabbed in this week but hey it's getting close. Oh by way, anyone notice the hurricane heading in this general direction??