Nero
Latest activity Postings About
-
-
Saturday was not my day. Had water line issues at a job site, took most of the day, had been planning on setting up forms to pour... -
Nero replied to the thread Another "Starter not turning engine over".We haven't gotten one goddanged snowflake here yet. Many below freezing days. Too dry. But this last weekend it's like Poseidon himself...
-
Nero replied to the thread Steering shaft coupler/ rag joint upgrades.Correct me if I'm wrong, but doesn't 86-91 use a double U joint steering shaft? Can't that be just slipped in?
-
That is looking super nice Nero
-
Nero replied to the thread Project White F250 Restore.Added a few more bits to the engine. Can't wait til she's done.
-
-
Let me get this straight, first engine had cracked pistons, oval cylinder, and broken valve springs and was still running goodish...
-
Nero replied to the thread How bad is the HG job on a 7.3 IDI?.I didn't see felpro studs listed here... You sure they aren't just regular head bolts? I've had 4 idi's apart. All of them had at least...
-
It should be spelled "should". Nero was right. It's best that you replace it, but you can reuse it and seal it with a thin coating of...
-
Quit talking to "those" people and listen to Nero! He speaks the IDI truth.
-
Nero replied to the thread How bad is the HG job on a 7.3 IDI?.Every engine has a front main, and a rear main seal. The paper gaskets are for the seal carriers. You can do the seal without pulling...
-
Nero replied to the thread How bad is the HG job on a 7.3 IDI?.The main seals are the round ones that seal the crankshaft. To do the timing cover you do have to pull it apart quite a bit to do...
-
Nero replied to the thread Will a factory turbo hurt a NA engine?.A 100% stock 093 kit will not hurt a stock n/a idi at all. Some may suggest to retorque your head bolts for safe measure, but the...
-
Nero replied to the thread How bad is the HG job on a 7.3 IDI?.Rear gasket set https://www.rockauto.com/en/moreinfo.php?pk=122669 Front gasket 'timing cover' set...
-
Nero replied to the thread How bad is the HG job on a 7.3 IDI?.My felpro upper gasket set came with rubber valve cover gaskets. I also used felpro front and rear seal kits, comes with the main seals...
-
Nero replied to the thread How bad is the HG job on a 7.3 IDI?.Yep that's the one.
-
-
Loading…
-
Loading…
