-
-
Some side to side is fine, so long as the wheels are not touching the housings. If its not, I'd run er. As for builders, other than any... -
I need to rebuild the center section of the turbo on the 93. The spool has lateral movement ( side2side) I see kits with " drop in" and...
-
Clb reacted to KansasIDI's post in the thread Original early copper brass radiators vs aluminum with
Haha.
When I bought my 91, it had the original brass. Partially clogged and leaky I replaced it with a plastic tank aluminum core unit from... -
I have a T-19, what is the reverse sensor? A T-19 and a GV would work also. Goat
-
I would change the axle ratio and/or increase tire size.
-
Clb replied to the thread Temporary Roof Sealer Recomendations.Someone has owned an old rv before.... Dicor products applied correctly seems decent so far...
-
I would not use anything silicone based. You will be hating life later when trying get stuff to stick to the area later.
-
Before I hunt... My buddy in grass valley needs a running 7.3, and a 2x4 zf. Thanks for lookin
-
Clb replied to the thread Temporary Roof Sealer Recomendations.In my line of work, that's good stuff.
-
Depending on how long 'temporary' is.. Sikaflex has an entire line of sealants for all sorts of situations.
-
Clb reacted to FrozenMerc's post in the thread Original early copper brass radiators vs aluminum with Like.
Bit of a back story. I designed and tested heat exchangers for a powersports manufacturer for many years. 100% of our heat exchangers...
-
Clb reacted to WMO4IDI's post in the thread Original early copper brass radiators vs aluminum with Like.
Just adding my 2 cents... Aluminum & plastic hate vibrations, they prematurely crack or bust a seal because the crimps fail. They don't...
-
Clb replied to the thread Original early copper brass radiators vs aluminum.For those who are searching for this, when my v series in my sig line puked the oem rad only thing available was the plastic tank stuff...
-
Butyl flashing may be an option
-
Brush on Flex Seal!
-
-
Loading…
-
Loading…
