Injector line clamps?

[Dustyman]

I redid my return lines and had to replace #8 line because of a hood/cowl molding being all messed up and letting water drip on injector. So anyway.... I noticed there were spots on the original lines that there were obviously clamps at one time, and all of mine are gone. Is this a problem I should worry about?

 

[89Laredo]

Yes, the lines will crack eventually without the clamps. Im sure someone around here knows where to get them.

 

[lotzagoodstuff]

+1 on needing clamps: the lines will crack without them as the diesel “paint shaker” tends to work harden them if they move around too much. My 300SDL managed to crack a line even with the injector line clamps in place.

 

[rreegg]

Looks like accuratediesel sells them, it mentions for Trucks only not vans. I did not check if others carry them

Fuel Injection Line Clamps | Ford IDI Fuel Line Clamps

Fuel injection line clamps are critical to prevent injection line failure. Ensure your vehicle is always in great condition with Ford IDI fuel line clamps!

www.accuratediesel.com

 

[Olds64]

You might check CDD. I've ordered from them before, A+ for price and customer service.

Classic Diesel Design

 

[rreegg]

You might check CDD. I've ordered from them before, A+ for price and customer service.

Classic Diesel Design

Appears CDD sells replacement injector line assemblies, complete with clamps, but not the clamps themselves.

 

[Olds64]

DOH!!

 

[ROCK HARVEY]

You can buy a cheap set of clamps for $40 on amazon. I definitely do not recommend the cheap Amazon injection lines, but the clamps should be good to go.

 

[DirtyWood]

Oregon Fuel Injection also sells lines and line clamps.

Shop

oregonfuelinjection.com