IDIoit
Latest activity Postings About
-
-
IDIoit replied to the thread Interest in Electric Vacuum Pump Conversions?.hydroboost are equipped with a nitrogen canister for emergencies -
IDIoit replied to the thread Interest in Electric Vacuum Pump Conversions?.i use super duty electric vacuum pumps. but i will never count on a electric vacuum unit to control my brakes. hydroboost is well worth...
-
IDIoit replied to the thread No wait to start light when hot.i didnt read all the posts, but if your truck is warm, you dont need the glow plugs. i actually wire mine to the engine temp switch, so...
-
IDIoit replied to the thread Building a TIDI from a couple motors plus new parts.someone has been through that engine before., the factory does not number the rods. i found a set of rods through facebook, and sent...
-
IDIoit replied to the thread New injectors and pump. Exhaust smoking..that should be set at 5 degrees btdc
-
IDIoit replied to the thread New injectors and pump. Exhaust smoking..retarded timing will cause white smoke. you need to adjust FUEL timing. it will run -10 ATDC and 16 BTDC. ask me how i know. lol get...
-
One other thing to add. I would not adjust the fuel screw on a fresh rebuild without express consent from the builder. I would not...
-
IDIoit replied to the thread 16x8 or 16x10 8x6.5 wheels.i have 16.5's x 8
-
IDIoit replied to the thread New injectors and pump. Exhaust smoking..who built the pump? there is only 2 sources i would ever buy a pump from now a days. what did the meter say when you timed it?
-
IDIoit replied to the thread Building a TIDI from a couple motors plus new parts.id be throwing that entire engine in the scrap pile. i doubt the rod is any good. maybe the crank and all the accessories. im about to...
-
-
Since the thought of wastegates have been canceled, I can find closer to this subject.
-
IDIoit replied to the thread parallel turbos.yea, i ordered a 150 cc pump from justin, just hasnt came yet
-
IDIoit replied to the thread Brass injector return caps.since this popped up ill throw my .02 out there... i dont really care for the plastic caps. i just dont like plastic crap! i was...
-
-
What about using a tube cutter and a flair tool to separate the sections, then running rubber hose in between like the stock system?
-
IDIoit replied to the thread parallel turbos.man, im boosting 25 psi on a factory cal IP, and i cant get this thing to pop. stock N/A block on headbolts. i actually deleted the...
-
-
-
Loading…
-
Loading…
