OMG HELP! I did something goofy

mexicanjoe

Full Access Member
Joined
Aug 4, 2018
Posts
321
Reaction score
267
Location
texas
Hey guys I pulled the solenoid off the fender on LuLuBelle and I taped them together. I got up this morning and they were all mixed up. Apparently masking tape ain’t strong. Which colored wires go to the starter side of the solenoid and shift h go to the battery side. I can’t find a good schematic that shows those wire located. Can anyone help. Photos would be nice
 

onetonjohn

Full Access Member
Joined
Mar 13, 2018
Posts
522
Reaction score
263
Location
California
One from the battery goes to the left looking at the inside of the fender. Right side goes to the starter. Not sure about the two small ones in front. I can check in the morning.
 

franklin2

Full Access Member
Joined
Feb 24, 2009
Posts
5,650
Reaction score
1,913
Location
Va
You didn't say what year you have. Below is a picture of a 86 diesel. You can see the 3 wires with the fusible links on the right, the single wire on the left, and the small wire with the elbow fitting should be red with a blue stripe.

You must be registered for see images attach
 

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,108
Members
26,430
Latest member
Brownlee5212

Members online

Top