onetonjohn
Latest activity Postings About
-
-
Insurance Co. on your rear end too? AAA sent out a letter last month, said I had piles on Trash, old Appliances, wood cars etc.... and... -
Look at LMC Truck or Bronco Graveyard for both of these. The rope trick works, but isn't really needed. New seals are very flexible. I...
-
onetonjohn replied to the thread Project Little Foot.Today I got the factory floor goo up (mostly) with air hammer and a scraper thanks to some folks on the forum that gave me the idea...
-
onetonjohn replied to the thread Clutch Heim Joint Mod and my trained left foot.I see. I got nothing other than make or assemble your own linkage.
-
onetonjohn replied to the thread Core support fix???.Crud. I think I just sent the old (good) core support I was saving to the srapyard a while back. It was for the short wide style (not...
-
onetonjohn replied to the thread Clutch Heim Joint Mod and my trained left foot.You have pics? I don't know what the bell crank or hiem joint are. That said, long ago, I used work in clutch/transmission shops, and...
-
onetonjohn replied to the thread Fuel Tank Breather Modification.I should have put new vent valves in when I had the bed off. Doh! Live and learn.
-
onetonjohn replied to the thread Unknown starting issue. Problem almost certainly lies with operator..Wasn't clear if it was pure fuel, or fuel and air mixed. I'm just going on fuel coming out the return line that wasn't hooked up.
-
onetonjohn replied to the thread Tail light voltage drop.My passenger side ground has a pigtail. The main wire goes to the stud on the front of the engine. The smaller wire to the frame by...
-
onetonjohn replied to the thread Unknown starting issue. Problem almost certainly lies with operator..Don't know if you have one, but a starting switch to bypass the solenoid is pretty helpful for bleeding the system you can buy one or...
-
onetonjohn replied to the thread Boost leak.Nice looking truck. Can't help on what to look for other than leaks on high pressure side. All my trucks are non-turbo (for now) so I...
-
onetonjohn replied to the thread Blown head gasket or cracked head???.What's an overhaul with machine work and new pistons and cost these days. Last engine I rebuilt I want to say was 4K for a V6 ranger...
-
onetonjohn reacted to IDIBRONCO's post in the thread Re'stirring the pot for intercoolers with
Like.
Now to answer your question. You have the basic understanding. Yes they will fit in a Bull Nose. Yes it takes extra work. Some people... -
onetonjohn replied to the thread Re'stirring the pot for intercoolers.Will inter coolers fit in teh bullnose style trucks. I remember reading it took a lot more fabricating than newer trucks. I've got a...
-
onetonjohn replied to the thread Removing trailer brake/bleeding brakes.I actually did. I was thinking, I too have an old hydrolic brake controller in the brown truck in my avatar. I wasn't tying to be a...
-
-
Loading…
-
Loading…
