-
-
WMO4IDI replied to the thread Another fuel system overhaul thread....That's what i got from it, 90 wmo 10 rug & then add 15 gals of D2. I'll give it a shot but with our -40s up here it might be a bit thick... -
WMO4IDI reacted to Cant Write's post in the thread Another fuel system overhaul thread... with
Like.
What does the 90/10 mean? Filter rating? Sorry to be such a noob. Or maybe 90% WMO, 10% RUG? -
I live in northern Illinois and I run WMO year round. I start the trucks on diesel and end my drive on diesel. Everything in between is...
-
WMO4IDI replied to the thread PoBoy centrifuge build.Quick vid of a dry run I have the controller unlocked to "16 mph", I'll need to get at tachometer for rpm readings.
-
WMO4IDI replied to the thread PoBoy centrifuge build.The enclosure is finished as well. I'm trying my luck with 1/2" pipe & a hydraulic quick connect for the inlet, I'll see how it...
-
-
WMO4IDI replied to the thread PoBoy centrifuge build.Finally updating this thread... I ended up going all out on a fancy electrical box for the motor & temperature controllers. I had some...
-
-
WMO4IDI replied to the thread Tachometer.Mine was bugging so i replaced the sensor... still had issues until i figured out that a hard slap on the dash over the cluster usually...
-
I went out and got @225gals of FREE diesel today and @40gals of oil to. I had to do some musical chairs for drums to put it in. The...
-
WMO4IDI replied to the thread Another fuel system overhaul thread....Not this winter, I'm tackling major body work & building a flatbed. I'm driving it for now so i can diagnose mechanical issues... not...
-
WMO4IDI replied to the thread Another fuel system overhaul thread....I was thinking more about dirt getting in the tanks during refills & catching it right there. Any clue as far as the selector switch...
-
WMO4IDI reacted to bumblebeer's post in the thread Automatically priming fuel system hack with Like.
I finally managed to fix all my fuel leaks, but I'm still dealing with an air intrusion issue. After sitting for a while, usually...
-
In parallel to my PoBoy wmo centrifuge project I posted, I've made 2 custom aluminum fuel tanks & I'm redoing the entire fuel system. I...
-
-
WMO4IDI replied to the thread E Brake Cables- question?.There's usually enough space between the cable & the tip of the guide tube to inject grease with a syringe. I use that extra tacky...
-
Let's hear some bowl ideas! So I picked up this chip spinning centrifuge for cheap. It is designed to wring machining chips. I don't...
-
WMO4IDI replied to the thread Centrifuge bowl design ideas?.Personally, I'd modify the existing bowl assuming you can weld at home. Weld a ring on the bottom to separate the drain areas while...
-
-
Loading…
-
Loading…
