-
-
RRocknit4x4 replied to the thread Are R&D parts good.Only other thing I’d add is look for signs of leaking fuel on the intake manifold. When I first got mine there was fuel puddling on the...
-
RRocknit4x4 replied to the thread Are R&D parts good.Favorite suppliers from the majority of members on this site seem to be: R&D Classic Diesel Designs Russ Repair I haven't heard of...
-
RRocknit4x4 replied to the thread RPM SPIKE WHEN LEFT TURN SIGNAL IS USED.Does the engine actually speed up or is it possibly just the tach jumps?
-
RRocknit4x4 replied to the thread OBS Interiors Double Din Kit?.I could only find a Right hand drive version on their website - do they have a LHD version?
-
RRocknit4x4 replied to the thread Floor mats.I have a pair of the same for about 3 years now - work great!
-
RRocknit4x4 replied to the thread 1993 7.3 IDIT - Delete the turbo, replace injectors and use a fuel pump calibrated for 174HP?.This subject was interesting to me yesterday so I googled a 7.3 idi marine engine and ended up on a boat forum where they were talking...
-
RRocknit4x4 replied to the thread Manual Fuel valves with stock gauge.I don’t have the TSV wiring diagram handy but I would think a standard 12v / 5 pin relay could be used in place of the TSV for just the...
-
RRocknit4x4 replied to the thread y and up pipe.If you want to spend the money IDIot on here makes a modified up pipe from your wye and uses a v band clamp in place of the slip joint -...
-
RRocknit4x4 replied to the thread Seat pad.when I got my truck the drivers seat was trashed - same bench your describing that you have - I ended up shoving a bunch of foam in the...
-
RRocknit4x4 replied to the thread Anyone in the Indiana area ?.I’m up in NWI but have found - including the dealerships - that most don’t have anyone familiar with these engines any more. I was lucky...
-
RRocknit4x4 replied to the thread Na turbo install.When I installed my turbo I got a new wire harness for the GPs to controller, ran it separate from the original harness, then routed all...
-
RRocknit4x4 replied to the thread Dana 50 TTB Automatic Hubs.Anybody know of a source to get new ones? I converted my truck to the warn manuals but that was because I couldn't locate replacement...
-
RRocknit4x4 replied to the thread IDI return line caps - aluminum 6061!.Dregs garage - he has a profile on here and FB - I talked to him about a set a year ago, but decided to go with the bars from Justin...
-
RRocknit4x4 replied to the thread Hydro boost question.I think I read on here the 91 down need the brake pedal modification to correct (for angle of the connecting rod I though) but the 92 up...
-
-
Loading…
-
Loading…
