IDIoit
MachinistFabricator
had a few minutes.
You must be registered for see images attach
Bringin home the kids truck
- Thread starter IDIoit
- Start date
IDIoit
MachinistFabricator
got the block cleaned up
460 ZF drilled to IDI.
and back into the chassis.
kinda waiting for a buddy to come over to finish the RSK
460 ZF drilled to IDI.
and back into the chassis.
kinda waiting for a buddy to come over to finish the RSK
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
IDIoit
MachinistFabricator
welp, that turbo engine needs some work. cylinders and crank look ok. but it had been hydrolocked before.
both heads were cracked.
I have a new set of turbo rods back from the machine shop that spec'd good.
I decided to go another way.
N/A 7.3 going in.
I had heads already done.
so I cleaned the short block, and studded the good heads on.
IP is almost done.
new sticks and ZD9's on hand.
both heads were cracked.
I have a new set of turbo rods back from the machine shop that spec'd good.
I decided to go another way.
N/A 7.3 going in.
I had heads already done.
so I cleaned the short block, and studded the good heads on.
IP is almost done.
new sticks and ZD9's on hand.
You must be registered for see images attach
You must be registered for see images attach
IDIoit
MachinistFabricator
just about done!
You must be registered for see images attach
IDIoit
MachinistFabricator
just about done!
IDIoit
MachinistFabricator
coming along
hope to shorten the frame next week
hope to shorten the frame next week
You must be registered for see images attach
You must be registered for see images attach
no mufflers
Full Access Member
the exhaust manifolds going to stay that shiny?
IDIoit
MachinistFabricator
for atleast a year lol
IDIoit
MachinistFabricator
slow progress... but things are heating up
You must be registered for see images attach
IDIoit
MachinistFabricator
ready to chop the frame.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
IDIoit
MachinistFabricator
18.75" taken out of the frame
You must be registered for see images attach
You must be registered for see images attach
IDIoit
MachinistFabricator
now has a 114.75" wheel base
You must be registered for see images attach
IDIoit
MachinistFabricator
fish plating almost done. and cab ready to pull
You must be registered for see images attach
You must be registered for see images attach
mckenziedg
Registered User
Great read to get me through the workday on Christmas Eve. That's an awesome project and that truck is going to be sweet when you finish it.
IDIoit
MachinistFabricator
actually fit better than I thought.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Similar threads
