snicklas
Latest activity Postings About
-
-
Driving 12 plus hours from Darrin’s rally in Grand Rapids on Sunday in a 2014 GMC Sierra pulling the trailer was rather comfortable... -
snicklas replied to the thread “The 6.9” project thread.I would also say that is it also changing tastes.... I've had Bulls, Bricks, and OBS's. I will likely have another Bull in the...
-
snicklas replied to the thread “The 6.9” project thread.Did that truck even cost that much when it was new?
-
Glad you turned it down. Clacky is normal on some engines. Old pump likely worn enough to be very retarded. Check timing again after...
-
snicklas replied to the thread F-Superduty Antilock Brakes.I count 10 lugs.... I wonder if that ia a Marmon-Harrington F-Superduty 4x4 conversion (took a 2wd F-Super and made it 4x4).... like...
-
snicklas replied to the thread new motorcraft glow plug issues.Here is a video that I have posted before. This guy was a tech in a Ford garage (he now owns his own shop, in the Chicago area I...
-
snicklas replied to the thread Stock rims..The vans (E-Series) stayed 8 x 6.5 after the 99 switch to 8 x 170mm on the F-2/350's. Not sure it went all the way to 07.... but it did...
-
snicklas replied to the thread Resurrecting a $900 1986 with 7.3idi swap. Fuel?.I think it is a little on the slow side too.... not "too slow to start" but ours always seemed to crank a bit faster.....
-
snicklas replied to the thread Resurrecting a $900 1986 with 7.3idi swap. Fuel?.If an IDI looses its prime, they can be a bear to get primed and restarted…. Let me share a personal experience to give you some...
-
snicklas reacted to Stu Bailey's post in the thread Resurrecting a $900 1986 with 7.3idi swap. Fuel? with
Like.
I think this truck is starting to sound just minty and we need peg to come around and tell it how it is from up north. He gets anything... -
snicklas reacted to IDIBRONCO's post in the thread So what did you do with your truck today? with Like.
These are aluminum ramps made by a fairly local welding shop.
-
snicklas replied to the thread So what did you do with your truck today?.That is the way I load the mower/tractors on the trailer. Makes it way closer to flat on the ramps, since I have a fairly steep...
-
I’ve strayed so far from the 6.9 project. Not really. But this thread is proof adhd exists. Loving my little ranger. Got the a/c going...
-
snicklas replied to the thread New injectors and pump. Exhaust smoking..One other thing to add. I would not adjust the fuel screw on a fresh rebuild without express consent from the builder. I would not...
-
snicklas replied to the thread 7.3 idi with 6.2 Detroit governor spring install.Search under user dyoung14……. Not sure if the videos are still out there…. But he had some fun with his bullnose……. He did the GM...
-
-
Loading…
-
Loading…
