Search results

  1. 6 Nebraska IDIs

    Obs column shifter replacement?

    Can the shifter be replaced in an obs without swapping the whole steering column?
  2. 6 Nebraska IDIs

    Can't get front main oil leak to seal up

    We've replaced the main seal twice, sleeved the dampener and re sealed the main plate on the front of the engine. Nothing stops it. And it's a bad leak. Like runs out almost like there's no seal there at all. Any ideas?
  3. 6 Nebraska IDIs

    AR15 7.5" Upper. Professionally built Spikes YHM Hardened Arms Griffin JPE Magpul.

    Yhm hand guard. Hardened arms 7.5" 1:9 stainless barrel Griffin m4sd comp Jpe adjustable gas block Spikes tactical upper receiver Magpul AFG2 All new. Only test fired by the gunsmith that built it. $550 shipped. OBO
  4. 6 Nebraska IDIs

    Jump engaging ac compressor clutch at the clutch terminal.

    Ok. How does one go about testing the clutch on a compressor by jumping it? I'm talking with the compressor removed from the truck. I have what I believe us a good compressor but want to check the condition of it and drain out the oil that's in it.
  5. 6 Nebraska IDIs

    HVAC experts. Best place for quality AC components

    What's the best place to buy quality compressors and condensers from?
  6. 6 Nebraska IDIs

    Fordcummins.com no longer in business?

    Links to their website no longer work?
  7. 6 Nebraska IDIs

    No power to injection pump fss

    About a week ago my brothers truck died on my dad while driving it. After a few minutes I determined there was no power reaching the ips fss. Can someone tell me why everything else ignition switched would work but the fss?
  8. 6 Nebraska IDIs

    Debating Parting out the Brown Truck

    Well guys this July will be 2 years since the wiring harness in the brown truck caught fire. I've been thinking, it's been a long difficult up hill battle with this truck since day one. I have allot of time and money invested in it. Along the way tried new things, and tried to improve the...
  9. 6 Nebraska IDIs

    So... I'm back. Aftermarket wiring into a slant nose?

    Since a week before moving back to the Lincoln area my truck decided to catch fire, I have not touched it and would really like to drive it again this winter. Has anyone ever used a aftermarket wiring system like painless hot rod wiring? I was trying to get them to make us a replacement harness...
  10. 6 Nebraska IDIs

    The Brown Truck went down like a champ, in flames of glory!

    Yep the old girl died on me about a week and a half ago. The wiring harness caught fire after work one night and she even got me home, me not noticing the smell of burning wires, before she died. I got home, shut her off and noticed smoke rolling out from under the hood. Luckily the fire had...
  11. 6 Nebraska IDIs

    Metal Clutch Slaves No More?

    I've been trying to find a metal clutch slave cylinder all day. Can't find them anywhere. Does anyone know where I can get one?
  12. 6 Nebraska IDIs

    Issues with VIAIR System, Running without ignition or manual controll switch ON

    Well I'm not sure what happened, but I've been in contact with VIAIR about another issue I've had with this system since I've had it. And to be honest they don't seem to want to be very helpful with that problem so this new one isn't going to go over well either. The original issue I had was...
  13. 6 Nebraska IDIs

    Love my neighbors

    Had to drive my brothers truck out here with a trailer that we'd borrowed from a friend. Couldn't meet up with said friend the night I made it out here with the trailer. I parked the truck and trailer on the side street next to my house for the night. The next morning I drove the trailer to my...
  14. 6 Nebraska IDIs

    Tried finding vacuum leak, now cruise control doesn't work.

    The cruise systems on these trucks gets more complicated the later in production you go. I was having issues with my brown truck not maintaining speed or taking a long time to pick up and hold speed. I knew I had a vacuum leak because I have stiff brakes. Well while trying to find the vacuum...
  15. 6 Nebraska IDIs

    Scored big at the pick and pull today.

    Last weekend I took my brother to the local pick and pull and we found a completely rust fee 86 F250 sitting there. It was a new addition to the yard that someone had bought in Texas and brought to Nebraska. There was no damage to the body, only a bad engine had put it there. So we inquired...
  16. 6 Nebraska IDIs

    Factory Turbo Inlet and Outlet housing gaskets, Need part numbers

    Does anyone have the part numbers for the gaskets used between the up pipe and turbine housing and the one between the turbine housing and the wastegate/outlet housing? I'm guessing Russ would know this.
  17. 6 Nebraska IDIs

    6.9 and 7.3 IP's, Injector Lines, Pump Gears, Tach sensor Gear Covers

    I have 2 6.9 IP's and one 7.3 IP that I don't need and would like to sell, all are sold as is, came off of running vehicles but have been sitting a few years in said vehicles. All had fuel still in them when I pulled them this last week. $100 OBO Pump and assembled sensors on pump. I have 1...
  18. 6 Nebraska IDIs

    Any current deals on IP's?

    Looks like I might need a new IP for my brown trucks NA engine. I know a while back there were some good deals on new IP's out there.
  19. 6 Nebraska IDIs

    Brake Master failed AGAIN.

    The brake master cylinder has failed in my brown truck again. I paid a shop about a year ago to fix the brakes in my truck less than a year ago and had some issues with them replacing parts they weren't supposed to replace first and so on. However I did finally get them to replace the master...
  20. 6 Nebraska IDIs

    Got home for Thanksgiving and the Brown Truck doesn't seem right now.

    Made the 2.5hr drive back to my parents for thanksgiving and I noticed an odd droning coming from the motor. Sounded kinda like maybe one of the intake valves has a more distinct close than the others when listening to the intake tube. I'm almost wondering if one of my lifters collapsed while on...
  21. 6 Nebraska IDIs

    Which Group 31 Battery?

    I know this has been beaten to death but I want to get a quick reference on which group 31 I should get for my 83. I have custom battery trays so its not like thats an issue. I would like to only buy a Napa Legend 75 or Legend 84. Those are supposedly still made in the US. Also does anyone have...
  22. 6 Nebraska IDIs

    Someone Looking to do something crazy? FS: Garrett GT3076R Dual Ball Bearing Turbo

    I bought this turbo to install on my Eclipse but after all the trouble I'm having trying to get a replacement turbine housing I'm putting it up for sale. Standard T3 turbine housings are easy to get for these but I wanted a replacement Forced Performance housing so it would bolt up to my Eclipse...
  23. 6 Nebraska IDIs

    911 Diesel Down! No pressure in Cooling system, AGAIN. WHY?

    I don't understand this. I've had so many cooling system problems its unbelievable. But its doing it again, my brown truck is over heating because of a lack of pressure in the cooling system. I pressure tested the system with my radiator cap on it and everything holds pressure so what would...
  24. 6 Nebraska IDIs

    Opportunity Deal, Should I or Shouldn't I?

    I stopped at a truck parts and service shop today to get a fuel filter for my truck, which I discovered I did not need since my fuel pump is the culprit, and had a service tech come out and talk to me about my truck. He went on about how he wished he had never sold his old 6.9 and how badly he...
  25. 6 Nebraska IDIs

    WTB: Complete Hydroboost setup

    Just as the title says. I'm looking for a complete hydroboost setup. I won't give $300 for a used hydroboost when a new motorcraft one is only $267. Theres only one salvage yard around that has one for a decent price but I think its an aftermarket a1 cardone part and I don't want to use that...

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,785
Members
24,099
Latest member
IDIBronco86

Members online

Total: 634 (members: 2, guests: 632)

Share this page

Top