Macrobb
Full Access Member
Mind you all, Typ4 sells mods to factory/ATS kits. Pretty sure his own isn't "stock".
That was the reason for my edit on his post. LolMind you all, Typ4 sells mods to factory/ATS kits. Pretty sure his own isn't "stock".
How large of an intercooler is needed to run a mild turbo? I yanked my AC system out of my truck as the lines had cracked and the radiator had been flattened by the PO. My truck was actually overheating with the AC condenser block most of my airflow. Has anyone tried running a top mounted intercooler with a cowl induction hood?
I am running a 093/factory turbo with a banks compressor housing that flows more than the original one with 60-1 wheel. I know I should have higher boost I'm going to adjust my timing in a little and try it a little more retarded. It does sound advanced when flooring it but it was mentioned before the noise im hearing is actually over fueling. It literally falls on it's face till the turbo starts spooling upRuss also is running a 093 kit with his 60-1 wheel, so its not an apples to apples comparison to you guys running 088's.
Get a Hypermax Smoke Puff Limiter. Seriously, it fixes that exact problem nicely.It literally falls on it's face till the turbo starts spooling up
It won't build more than 10 psi though, also it clears up completely at wot with that. Its almost like it's not actually getting enough fuel. Like fuel shutdown happening early or max output not happening