The_Josh_Bear
Latest activity Postings About
-
-
I thought also at the showerheads. eventually to clean the tanks I used a cement mixer and attached the tanks on it with a few shovels... -
:popcorn>>>> :frustrate :backoff :drunk: Goat
-
I have 2 suggestions: You might try checking whether your fuel tank is venting properly. When you start having fueling issues, unscrew...
-
Believe it or not, no one has ever told me different.
-
Was looking for pics to show the hid in projector beam out across a field below my garage and finally found it. Low: High:
-
Leds in the factory housings are generally bad. Light doesn't reflect where it needs to go since the diodes aren't in the same spot as...
-
Right after reading only this, I KNEW that they had lied to you. A LED 9004 is widely available. This is correct too. Me neither. I...
-
Both of the top two options seem viable, the second from the top may be too bright… being able to see at the cost of others vision won’t...
-
They definitely have their drawbacks, and may not be the ultimate end result, but I think they’ll do for now. I have the Bronco...
-
That's a big help too.
-
These are the 5700K Holley Retrobright lights. They are a white light, but seem softer than some other options. The road picture is low...
-
The_Josh_Bear reacted to SkylabTech86IDI's post in the thread Project Thread: 1986 F250 “Farm Truck #1” Build Thread with
Wow.
Extremely helpful advice - thanks. I’ll keep at it. It’s immediately evident why loosening the pulley bolts would make a such a... -
The_Josh_Bear replied to the thread Charging problems 18 VOLTS.I hear you on the amps but I've never see that happen with volts. Also, your truck should be charging at 13.8-14.6v-ish. 13.2 is low...
-
You can't turn it over to retard the timing?
-
The_Josh_Bear reacted to IDIBRONCO's post in the thread So what did you do with your truck today? with Like.
Almost. Your saving grace was the fact that you started out with using your tailgate to hold parts.
-
-
Loading…
-
Loading…
