I plan on putting the hole drivetrain out of a 1988 F-350 4x4 in to my 1968 F-250 4x4 its drive train is failing but the rest of the truck is in great shap. The 1988 pickup seams to be in good shap except for the frame (broke in several places) and the cap is shot. It has not been started in 5 years. I went and got it today after checking all the fluids and a good bat it srated right up withonly 10 secs. of cranking. it runs really good with a little white smoke. i will check the compression on it befor i pull the motor so after reading all i can on this site for the last several weeks here is my plan for this motor.
1. Dps injectors and pump? I have seen only one bad coment on these and lots of good ones.
2. Type 4 cam. still dont know how to get one?
3. turbo. plan on making my own kit. can i realy run 20 psi of boost if i put good head studs in it and a new gasket?
4. Intercooler out of a powerstroke if i can find a good one.
So this is my plan tell me what everyone think or if there is anything you would change.
1. Dps injectors and pump? I have seen only one bad coment on these and lots of good ones.
2. Type 4 cam. still dont know how to get one?
3. turbo. plan on making my own kit. can i realy run 20 psi of boost if i put good head studs in it and a new gasket?
4. Intercooler out of a powerstroke if i can find a good one.
So this is my plan tell me what everyone think or if there is anything you would change.