Fuel Pump Block Off Plate

[harrietnorth]

You must be registered for see images attach

Deleting the stock fuel pump, this is the block off plate that the googler spit out.

Does this get the job done or are there other recommendations out there?


Spectre Performance 42473 Fuel Pump Block-Off Plate with Bolts for Big Block Chevy https://www.amazon.com/dp/B000BPZ42S/ref=cm_sw_r_cp_api_i_usHLEbMA297HK

 

[frankenwrench]

I believe so. Don't remember part number off hand, but I grabbed one off the performance wall of orily for a chebby to do mine. Looked like that one. Someone will correct me if I'm incorrect on that being the correct part number

 

[SkipBurney]

It will with a little bit of grinding

 

[Clb]

There is a pn in the tech section with the facett (fail, read up first)pump swap on here...
hope you did some research on e pump models!

 

[catbird7]

I think it's simply a big block Chevy block-off plate.

 

[hesutton]

Yes that will work. I've done this a few times and used the same block off plate for a BBC. Never needed any modifications. They should just bolt right in place of the mechanical lift pump.

Heath

 

[SkipBurney]

I used a BB Chevrolet plate and the casting flange on the block held it off so I had to grind mine just a little for it to clear

 

[BrianX128]

There are for sure two parts numbers and the one will leak some if you don't grind a small part off. I've had both, they are listed on here somewhere but I can't find it. It's an easy fix if you get the wrong one though, just let the truck idle for 5 minutes and find out before you go driving.

 

[mblaney]

I made my own (too lazy to go to the store and buy one ). Just buy one and match it up with the profile of your old fuel pump. Grind away if needed.

 

[LowTech]

Would love to get one that doesn't require grinding as ac power is not a thing where I'm camped.

Sent from my Z6201V using Tapatalk

 

[Scotty4]

Would love to get one that doesn't require grinding as ac power is not a thing where I'm camped.

Sent from my Z6201V using Tapatalk

File and sand paper?

 

[typ4]

You guys know that there are 2 fuel pump mounting shapes, ours ,which is 99% of all american carbed vehicles.
Then a vertical one used on the Ford M series engines. And very few others.


https://www.googleadservices.com/pa...jayMC8l_LoAhVTHzQIHReFBcUQ9aACegQICxBD&adurl=



https://www.google.com/imgres?imgur...hUKEwi-0cbpl_LoAhULIzQIHSemD00QMygcegUIARDNAQ

 

[LowTech]

File and sand paper?

May have a file somewhere.[emoji848]

 

[Cubey]

It will with a little bit of grinding

Not this one.
https://www.spectreperformance.com/42473-fuel-pump-block-off-plate

It installed perfectly on my RV. The included bolts are right for an IDI block too.

Go read Crapazon reviews, others say the same thing: no grinding needed on IDIs.

You must be registered for see images attach

 

[SKJUMP]

454 Big Block Chevy is a direct bolt up. I have one on my 94 IDI.