nelstomlinson
Latest activity Postings About
-
-
nelstomlinson replied to the thread So what did you do with your truck today?.Kbenz I'm not sure what I'll use for lines, might just go with rubber fuel hose on barbs. It lasts for years. -
nelstomlinson replied to the thread rotary fuel pump.I started putting in electric pumps when I got tired of replacing garbage mechanical pumps. From here on, when a mechanical pump dies...
-
nelstomlinson replied to the thread So what did you do with your truck today?.Plan is to plumb the tanks to a brass 6-way valve mounted under the cab floor, then through a prefilter and filter to a Walbro pump, all...
-
nelstomlinson replied to the thread So what did you do with your truck today?.Fired up the brown truck, it sputtered and died in the driveway. The tank was 3/8 full. I filled it up, and it started and ran great...
-
nelstomlinson replied to the thread High pressure fuel pumps.If they'll keep selling his cams, I'll go with those.
-
nelstomlinson replied to the thread High pressure fuel pumps.I looked on their site, couldn't find specs for that 1840 grind cam. I looked at the Russ Repair website, it's still up. Is the family...
-
nelstomlinson replied to the thread High pressure fuel pumps.Here's the reply from Oregon Cam. I am not familiar with the logger cam reference but we do still make out street cam for that engine...
-
nelstomlinson replied to the thread Best Online Vendor For Parts.I'm using a Walbro pump, USA made, so far so good.
-
nelstomlinson replied to the thread High pressure fuel pumps.I sent an email to Oregon Cam.
-
nelstomlinson replied to the thread High pressure fuel pumps.I surely hope Russ's cam design didn't die with him. I'm gonna want one more.
-
nelstomlinson replied to the thread High pressure fuel pumps.Back to carrying a spare, an idea I'm going to explore eventually is to cut a big, round hole in the outer bedside in front of the rear...
-
nelstomlinson replied to the thread Cup holders.Problem with Goat's cupholders is there can only be one. You need one for your cup, where's she gonna put her cup?
-
nelstomlinson replied to the thread 7.3 idi build for my S1654.Isaac, are you going to run the crossover pipe under the front of the engine?
-
nelstomlinson replied to the thread Engine ground washer.When the electricians bolt the cables to the paddles on 1200 Amp switch gear, and in the transformer that feeds it, they clamp clean...
-
nelstomlinson replied to the thread New here.Greenie, you could move to Interior Alaska, we treat the roads with pea gravel, not salt. Not much rust here.
-
-
Loading…
-
Loading…
