Archieb89
Latest activity Postings About
-
-
Archieb89 replied to the thread A/C compressor oil and refrigerant.I just plugged one side of the old evap and put some compressed air through it. And it does have a leak somewhere in the fins. It loses... -
Archieb89 replied to the thread A/C compressor oil and refrigerant.Yeah I've got all new hoses and o rings. I'll give it a try.
-
Archieb89 replied to the thread A/C compressor oil and refrigerant.I would. Only problem is the original quick disconnect fitting is all messed up and I'm pretty sure thats where it was leaking from. Not...
-
-
Archieb89 replied to the thread A/C compressor oil and refrigerant.Another problem. The evaporator i ordered for this vehicle specifically is wrong. The brakes that stick of the evap core outside the...
-
-
Archieb89 replied to the thread A/C compressor oil and refrigerant.How do you go about adjusting the low pressure switch?
-
Archieb89 replied to the thread A/C compressor oil and refrigerant.They do have one from a couple manufacturers that I've seen but I'll just stick with the red for now. If it's not cold enough maybe I'll...
-
Archieb89 replied to the thread A/C compressor oil and refrigerant.Do you recommend a variable orifice tube? I've heard mixed things about them. Like them failing often so I just got a motorcraft red...
-
If I remember right I used 8-10 ouncses of pag150 and the total charge was 2.7lbs
-
My liquid line to evap inlet was not holding and pressure so I'm re-doing most of my ac system. Everything but the compressor and...
-
Archieb89 replied to the thread Banks turbo outlet size.Yeah I'll see if i can call them today and see if i can get some spares
-
Archieb89 replied to the thread Banks turbo outlet size.Do you think just a piece of radiator hose that size would be ok? I can't seem to find any couplers that aren't silicone
-
You have the newer one brother, typically any hose should work, just dont get silicone. With the crankcase breather returning oils to...
-
Banks only had one wastegated side winder turbo. So tired of the wrong info on here. It’s 2.25 or 2.5. I’m not sure. Best to measure...
-
Archieb89 replied to the thread Banks turbo outlet size.I've got the wastegated one. But its that blue hump connector between the hat and the compressor outlet. I dont know if it's so old that...
-
-
Archieb89 replied to the thread Banks turbo outlet size.I ripped it apart this morning before work and put a tape measure. I measured 2.25 ID about also the intake hat inlet measured about the...
-
-
Loading…
-
Loading…
