Search results

  1. idiburner

    Engine dies with throttle

    Hey guys. Today I'm working on one the work trucks. It's a 94 f350 single cab and chassis tow truck. 2wd e4od. Problem Startes and idles good but when you hit the throttle or use the manual end of it on the injection pump the rpms will drop slightly then the engine will slowly gain rpms and it...
  2. idiburner

    Electric fuel pump

    Afternoon guys. Quick question. I own a 7.3 cclb auto and I am relatively new to 7.3s. I am aware They have a cam driving fuel pickup in the valley. I installed a 105 gallon fuel tank in the bed and ran my front tank lift pump into the 105 tank. So my fuel switch is front for 105 gallons or rear...
  3. idiburner

    7.3idi turbo rebuild

    Hey everyone I am doing an engine rebuild on a 94 7.3idi with the factory turbo on it. My question is, is there any upgrades I can do to the turbo wheels like wicked wheel etc. And what about the down pipe is there anyone that makes a good one for this system? Thanks guys Is there anything...
  4. idiburner

    Need heat

    Hey everyone I need a hand. I drive a 93 f350 crew cab dully 7.3idi auto 4x4. It makes no heat. The temp gauge moves to just before the N and no more. I replaced the heater core, thermostat, fan clutch. Truck still doesn't push any heat out the vents. The blend door does work and moves freely...
  5. idiburner

    Dmi bumper

    Hey guys was wondering if a Dmi spring bumper off a 2000 f250 will fit my 1993 f350. Found a guy selling a perfect chrome one for 50 bucks, and been looking for one for some time. Thanks guys.
  6. idiburner

    Fan change

    Hey everyone I have heard before that it's possible to remove the stock fan and gain HP, fuel economy, and tourqe back and put two electric fans in place with a switch? Is this true
  7. idiburner

    heli-coils

    hey everyone so i am looking at getting a new truck its a 95 PSD 5speed 4x4 he says the HPOP inlet fitting threads are stripped so the truck dosnt run. i was thinking cant i just heli-coil it and that would fix it? or would i be better off replacing the HPOP. thanks guys
  8. idiburner

    crank bolts

    hey everyone so 8 of my 9 crank bolts broke off flush with the crank where the flywheel goes. I was wondering whats the best way to get them out? or if I am lucky does were the botls go on the crank come off and have the ability to be replaced if I remove the rear main seal without replacing the...
  9. idiburner

    map senseor

    so I was looking under the hood and found this map sensor I think its called all three wires were cut off and I coudnt find the wires they were cut from. the reading I have done about it shows it has to do with an auto trans telling it the outside air pressure for shifting. my truck used to have...
  10. idiburner

    bad cdr valve?

    so i toke off the cdr valve becasue i had standing oil in my intake tube that goes to the turbo i cleaned it and i am able to blow in either side and feel it out the other side does it sound like its bad? 93 f350 cclb 7.3idi turbo all factory
  11. idiburner

    7.3idi timing question

    ok everyone so my truck starts and runs but as soon as you let it idle it shuts off as long as it stays above 900rpm it runs and sounds fine not knocking motor dosnt shake. it takes about 15 seconds of cranking on it weather cold or hot with glow-plugs all work all glow-plug tech is new. the...
  12. idiburner

    HELP AUTOLITE GLOWPLUG

    so cylinder 2 glowpulg had to be an autolite and had to brake how do you guys get those tips out off the piston i dont have time to remove heads? its a 7.3idi turbo
  13. idiburner

    bolt pattern

    easy question for everybody would a set of rims from an 87 chevy fit my 93 f350 4x4 cclb there not factory chevy rims https://madison.craigslist.org/pts/4648732632.html thanks everyone
  14. idiburner

    question about a clutch master clyinder

    hey everyone so looks like I have a bad master for my clutch why my pedal goes to the floor and wont return. out I have a question my buddy owns a 86 f250 6.9idi 5 speed 4x4 and his clutch master has a inlet for a vacuum line and I was wondering would that master off the 86 f250 work for my 92...
  15. idiburner

    external alternator regulator

    hey everyone anyone got a picture or now what wire goes to what letter on the external altnator regulator the little grey box that attaches to the wall. i was climbing around the engine bay when i accidentally discounted all 4 and dont remember how they go back on thanks guys 92 f250 7.3idi...
  16. idiburner

    weird problem

    hey everyone quick question the gauge cluster in my 92 f250 7.3idi 5 speed 4x4 eclb everytime i turn the key to on position the lights on the cluster turn on anyone have any ideas???? i am totally stumped?? i have so far swapped out gauge clusters and the same thing dosnt fix it sorry for...
  17. idiburner

    e4od question

    so i replaced my transmission recently an e4od with an e4od and the only problem with the last one was that the pump seal went and i thought the other one in my garage was a perfect replacement which in theory it was. but after i did the job now the new used transmission revs super high in first...
  18. idiburner

    lights question

    hey everyone i just finished wiring up my goose-neck trailer. but a problem when i turn on the turn signals like the left one is blinks at a different rate then the truck and it causes the right turn signal to dim and re-brighten like it was flashing but its not and its the same when the right...
  19. idiburner

    clutch pedal problem

    Hey everyone got problem with my pedal going to the floor an not springing back up it needs to be returned by hand. We bleed the line and clutch but the pedal is still no different pushes straight to floor and stays thanks for help
  20. idiburner

    brakes question

    Hey everyone i kn ow this isnt really and 7.3idi question but i didnt know any place better to ask. i just picked up a goosneck trailer for my idi and all the wireing was tore out of it so yesturday i started wiring it and today i got to the trailer brakes 2 axles 4 brakes. but problem there...
  21. idiburner

    steering shaft help

    Hey everyone quick question can the steering shaft can slide in and out of the gear box I only ask since I swapped out my cabs and now my steering shaft seems 10x times sharter then it was and dosnt even reach into the cab anymore so thanks for any help
  22. idiburner

    e40d question

    hey everyone question on my e40d. my recently did a trans swap on my 93 7.3idi turbo cclb 4x4 4.11 gears. and before i did the swap the old trans made the truck take off like a rocket in first like a race car lol. then the trans pump went. instead of spending any cash i had another e4od out of...
  23. idiburner

    package question

    Hey everyone got a question I own a 94 f350 xlt crew cab long bed 7.3idi turbo auto 4x4 and it says on the front doors Fontana with white strips running down it. I cannot find anything online about it does anyone have any info on it thanks all
  24. idiburner

    starter solenoid

    Hey everyone i am replacing the starter solenoid and I want to make sure its 93 7.3idi turbo auto 4x4 and just want to make sure all the wires on it are on the correct studs so if and one has a picture or adive be super helpful thank y'all and happy 4th of july GO AMERICA
  25. idiburner

    e4od question

    Hey everyone have a quick question is there anyway by chance you can tell if a trans has a shift kit in it? I ask because the trans pump on my e4od went out on my 93 idi turbo 4x4 and I am not the orignal owner and the trans has been out before. Luckly I had another trans from a 92 idi nonturbo...

Latest posts

Forum statistics

Threads
91,294
Posts
1,129,863
Members
24,107
Latest member
lewisstevey7

Members online

Total: 810 (members: 8, guests: 802)

Share this page

Top