Search results

  1. Twostacks

    Slave Cylinder Installation

    No, I meant "Ratchet Clamp", got a throw away from Harbor Freight . Took the pads off and drilled a dimple on the edge so that the round end of the push rod would sit in it , mounted the slave and used a screw driver to pluck it into place. Clamp down on the slave before mounting. used a fifteen...
  2. Twostacks

    Slave Cylinder Installation

    Had the same issue, used a ratchet clamp to squeeze the push rod in, worked like a charm
  3. Twostacks

    Diesel Injection Service based out of Mobile, AL.

    Anybody ever use "Diesel Injection Service" located in Mobile, AL for pumps or rebuild service
  4. Twostacks

    Which Flywheel

    Thanks for your reply icanfixall, but which one should I buy as far as tooth count or does it matter. I found some with 155 and 157 mine is 154 and I'm not sure that's the right one.
  5. Twostacks

    Which Flywheel

    I have a 94 F250 7.3 IDI Turbo with 5 spd that I converted from DMF to SMF. I have about 4k miles on it since the conversion and the starter started to grind against the flywheel teeth on the flywheel, thinking it was a bad starter I replaced it and it did not resolve the grinding issue. I...
  6. Twostacks

    BABY MOOSE FOR SALE

    ****SOLD***** SOLD***Before I sell my truck I removed the baby moose pump I had rebuilt by Mel and replaced it with my spare stock one. I hate to sell it but it gets very little use. The pump is about 2 years old and has about 5K miles on it. It ran on a clean fuel system and by that I mean I...
  7. Twostacks

    Help broke off a screw on my locking hub

    yes I tried but it snapped about 1/4" below the surface of the hub making it difficult to center punch. I went to carquest and ordered a set of Mile Markers should have them on Monday. Thanks
  8. Twostacks

    Help broke off a screw on my locking hub

    I guess I didn't make myself clear, It not the allen screw I need it's the locking hub where the screw goes in to hold the hub cover with the selector. Anyone that would post to buy a 5 cent allen screw should drive thier truck to the nearest junk yard and have it crushed. Anyway went to my...
  9. Twostacks

    Help broke off a screw on my locking hub

    Just put new bearings and universals on my frontend and snap :wtf: one of the screws that hold the locking cap on. Does anyone have a spare locking hub they want to sell? It's for a 94 f250 D50 30 spline. I can paypal. Thanks V
  10. Twostacks

    Kent Moore Timing Meter On Ebay

    Hey Gary I got your Kent Moore delivered on Monday. I'll be timing my truck this Saturday and will be ready to ship to the next member on Monday. I'm thinking of turning up the pump a flat or two and was wondering if this would effect the timing. Should I time it first then turn it up or vice...
  11. Twostacks

    I'll never let anyone drive my truck

    This weekend took my boat out for a nice day of fishing. My brother caught a nice 24" fluke which is very rare in the waters off New Jersey, anyway after about 5 hours we headed back to the ramp and anything that could go wrong went wrong:mad:. First we broke the negative stud on the battery...
  12. Twostacks

    Gremlins are here, troubleshooting help please.

    I sure hope not, :angel: when I installed mine I didn't take the clocking of the lifter in the bore into consideration. engine runs fine and I was getting plenty of oil to the rockers
  13. Twostacks

    Had to replace a battery today. Bought a group 31......

    x2:sly
  14. Twostacks

    To Moose or not to Moose that is my question

    I just took mine to MV inspection about a month ago and found out that any diesels pickups older then 1996 are exempt from emissions testing in Jersey no inspection sticker issued, but like Goose mention the State troopers and local cops can and will inspect your rig if they deem nescessary. If...
  15. Twostacks

    To Moose or not to Moose that is my question

    Not rich by any means :rotflmao I work for the State of NJ and Governor Christie just took a big ass bite out of my check. If I had the money I'd be driving a new Ford diesel :D I don't need to roll the coal cops don't like it much in these parts of Jersey, but I hear what your saying.
  16. Twostacks

    To Moose or not to Moose that is my question

    Thanks for your input I guess it will be the moose build I might want to add more power at a later date:sly Thanks V.
  17. Twostacks

    To Moose or not to Moose that is my question

    OK, sent my pump to Mel for a Moose or Baby Moose build I'm not sure which :dunno. I was leaning towards a baby moose but it wouldn't be that much more $$$ for a Moose pump. So which way do you guys think I should go. I don't do any hauling or racing just tow my boat every once in while. I...
  18. Twostacks

    New rings ????

    Will new rings eventually seat? I've read a few threads that you should work the engine hard and get it hot when you install new rings like pulling a heavy load. I've driven her about 100 miles give or take just around town dosen't get much heavy use. Should I go ahead and load her up and seat...
  19. Twostacks

    Have a problem with the AC

    I'm trying to remove the orifice tube but not sure how it comes out. I removed the collar that goes arounf the pipe and pulled on it but it dosen't budge. It spins around easily but when I pull on the tube it's not coming out:confused: and I don't want to put to much force on scared I might...
  20. Twostacks

    Dim gauge cluster

    I wasn't happy with the brightness of my gauge cluster so I decided to take it apart and found alot of dust covering the reflectors. Reflectors were cleaned and I added high output LEDs and added white face templates. After all that the dash is still dim.-cuss I went back to the stock bulbs and...
  21. Twostacks

    changing steering pump reservoir

    I did the hydroboost mod on my 94 and it's great, stops on a dime:sly. I went with the dual resorvior and it was pretty easy to do the swap with the pump on the truck. One thing I'm not too happy with is the pedal hieght, it's the same as the clutch so when going from the accelerator to the...
  22. Twostacks

    RABS Control Module

    :popcorn
  23. Twostacks

    Does anyone know what this color is??

    It's definately a light brown or tan could also be called camel or palomino, just wondering if someone knew the exact name ford gave it.
  24. Twostacks

    Does anyone know what this color is??

    OK, can anyone tell me what color this is, it's the ash tray from a f150 gasser 92-96. Got the whole interior from a friend who had it in storage but can't remember what year it came out of. I'm thinking 95 or 96, It looks like it's a light brown to me but need to know the oem name for the color...
  25. Twostacks

    Rear Drums Heating

    Had this problem with my 94 left drum would drag, thought it was the left parking brake cable and replaced it, still had the drag so I installed new hardware on both sides and it took care of the problem.

Latest posts

Forum statistics

Threads
91,287
Posts
1,129,812
Members
24,106
Latest member
lewisstevey7

Members online

Total: 772 (members: 4, guests: 768)

Share this page

Top