Picking up where I left off.
Here is the lever for the seat.
You must be registered for see images attach
And seat installed.
You must be registered for see images attach
Probably going to have to trim it. Door closes but I think it will hit the door pocket.
You must be registered for see images attach
It works.
You must be registered for see images attach
I checked the travel. Seat won't hit the windshield. Spring is weak enough the seat has to be held forward or it just slides back. Turned out pretty good I think.
On to the next thing. Pulled these out of the filler necks. These were a really stupid idea. No wonder you can't get fuel in these tanks.
You must be registered for see images attach
This is my solution.
You must be registered for see images attach
1/2" hose vent to the tank to the neck. I'll cut the hose to length once I set the bed on. Did the front one too.
You must be registered for see images attach
Bought new bed hardware. Dorman kit for the superdutys.
You must be registered for see images attach
Looks decent. I think they will work.
Also got battery hold downs.
You must be registered for see images attach
Need to trim the studs off but it was a quick fix. Not sure I'm going to get lids done but I think that will make it road legal. Still have to do the one under the cab.
Front leaf spring clamps finally done.
You must be registered for see images attach
Got clamps on all the pipes.
You must be registered for see images attach
That's a pile of clamps. I painted the core support where I cut through for the core support. Bunch of other little things. Early night tonight relatively speaking.