Search results

  1. Mat J

    clutch issue

    91 idi with a zf5 less then 5000 miles ago i put in a SMF and 12.25" clutch and kevlar throw out bearing new slave cylinder. have the adjustable clutch rod going into the master and everything worked great. out of no where this morning the clutch pedal lost some feeling and the clutch wont...
  2. Mat J

    ats turbo kit

    I bought a used ats 093 wastegated turbo off a member on here a while back, and installed it and couldnt stop my boost leaks but got the turbo to spool up and make a few lbs but I just took it off because I bought a superduty powerstroke. I know im not going to get the money I payed for it so im...
  3. Mat J

    pyro and boost gauges

    have an autometer c2 white face blue backlighting electric gauges for boost 0-60 and pyro up to 1600. Also have a pod for both gauges that fits newer super dutys above the rear view but can be made to fit other things. The ele connections were all cut but you can splice into the wire or get...
  4. Mat J

    ATS install NO BOOST

    Well i bought a used ats kit the 093 stock ford set up. the turbo had a little play in it. i installed everything BUT the down pipe, it wont fit for anything. i cant get the two flanges compleatly paralell to put the v band clamp on it. i hooked up a boost gauge to the intake hat and driving...
  5. Mat J

    installing turbo

    installing turbo PROBLEM with pics ats 093 anyone have any tips to add on installing it. i have the ats instructions. it says to reroute the return lines that go on the back or something?
  6. Mat J

    WTB boost gauge

    if any one has a 15psi boost gauge that has a black face id be interested. please post a picture. also looking for a water temp gauge my isspro crapped out.
  7. Mat J

    WTB used injector 7.3

    my friends got a stuck open injector on his idi. he needs a whole new set but doesnt have the money yet. does anyone have one or two spare injectors he can have for cheap?
  8. Mat J

    throw out bearing zf5

    had a very noisy throw out bearing before my clutch job and after i greased everything up and put the new TOB on i still get the same noise. what can i do to get rid of it. i can hear it spinning if im sitting in N and randomly it just makes a rattleing sound. and people always worry the thing...
  9. Mat J

    WMO filtration

    I scored about 55 gal of used diesel oil and can keep getting more so i want to start burning the stuff. i need help figuring how to set up the filtration system. and where to get the parts. and whats the best way to set it all up. i think it will be easier to go with something gravity...
  10. Mat J

    cant remove carrier from 10.25 rear

    iv got the bearing caps off and have the axle shafts out. and cannot get the damn thing out. do i need to unbolt the ring gear first? iv tried prying it out but it doesnt want to budge. when i checked backlash it was .030 and spec is .008-.012 or something close to that. the wear looked...
  11. Mat J

    got the SMF done

    my DMF had 3/4 play and the clutch slipped bad and the throw out bearing made noise. i pulled everything apart and had tons of hot and cracked spots on my flywheel. i installed a 12.25 valeo smf kit off ebay for i think 550. and put in a kevlar pilot bearing and new slave. after...
  12. Mat J

    sound deadener

    what have you guys used for sound deadner inside the cab? the insulation under my floor mat got wet and nasty so i took it out and boy is it loud. i really need something that wont hold water. and can get wet.
  13. Mat J

    twisted slip yoke

    i have my drive shaft out from changing the clutch, but the slip yoke doesnt move at all and i cant beat it apart. i guess i twisted the splines? i have a reg cab long box zf5 2wd that the shaft is out of. i have a ex cab long bed 4x4 that the shaft is good in. i measured both and the...
  14. Mat J

    removing torque converter

    iv got the motor out a truck to swap with a c6 trans and how do you remove the converter? i only see bolts on the motor side of the flywheel but it doesnt look like i can get to them?
  15. Mat J

    switching open to LS

    I have a 10.25 rear with 3.55s open carrier. and a 10.25 with 4.10s and limited slip. I was thinking of taking the limited slip out and switching it into my axle with 3.55s then taking my open carrier welding the spider gears and putting in my axle with the 4.10s i havnt done a swap like...
  16. Mat J

    limited slip WANTED 10.25

    looking for a limited slip carrier for a 10.25 rear end.
  17. Mat J

    aftermarket speedo

    I im looking into adding a aftermarket speedo because mine doesnt work, the gear in my trans must be messed up because i have tried other gears and they get stripped out in 150miles. I found this...
  18. Mat J

    blower motor problems

    on my 91 the a/c and heat were working fine, next day neither would come on. i looked at the 30amp fuse and it was not blown but melted. and it messed up the fuse holder too. but i think i might be able to put another fuse in, but i want your opinions first. i know there is some type of...
  19. Mat J

    is this a good deal

    sorry guys hate to give you another is this a good deal thread. i went and looked at this 90 4x4 350 CC SRW with a n/a7.3 the outside is in good shape it has some rust around the roof corners and stuff. the floor boards in the cab on the drivers and passenger side are completely rotted out and...
  20. Mat J

    grey smoke not black?

    I have my pump turned up but never go around blowing smoke. I was pulling a truck out of a swamp the other day, and noticed im not smoking black just grey. So today I confirmed this. With heavy foot I get alot of smoke but it was grey not black. What would cause this, bad injectors? Its over...
  21. Mat J

    hydroboost parts

    i can get all of this stuff for i think 50. he said everything worked great when it came apart. does it look like there is everything here for me to convert to hydroboost. he doesnt have the break pedal just everything in the picture. http://www.postimage.org/image.php?v=aVPiXZ0
  22. Mat J

    eninge not getting hot enough?

    my stock temp gauge never worked, so i put in an isspro and it read 190 running empty. well then it started reading only 140 and then it wouldnt go over 100. so i replaced my thermostat with a motorcraft one because i figured my old one was stuck open. well the one i pulled out wasnt the same as...
  23. Mat J

    help dd broken down

    i went to replace my thermostat and took off the wires on my fuel filter. well everythings together and i am leaking tons of fuel out of the top of the filter head where the wire plugs in. i think its for the fuel heater. or vacuum meter. it is just a plastic fitting with a connector running...
  24. Mat J

    WTB SMF

    looking for a SMF for an IDI with a zf-5 ;Sweet i know the lucky mod is cheaper but i dont really want to do that on my dd
  25. Mat J

    f-450 flywheel zf-5

    My DMF has had it and and I dont really want to do the lucky mod for my DD and for hauling the horses around. There is a junkyard that will deliver me a f-450 flywheel for 125 the truck had a zf-5 i thought these were a SMF but i just wanted to make sure, im going to see if they can work...

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,801
Members
24,101
Latest member
dieselmainiac

Members online

Total: 700 (members: 8, guests: 692)

Share this page

Top