Deutz866
Registered User
Im rebuilding a 12v and I just reassembled the valve train and was in the process of setting the valve lash. Well for some reason at least 1 or 2 of my valves at TDC 1 and TDC 2 are too tight to loosen all the way. I have the alignment on mark on the crank lined up with the two on the cam and I have the camshaft hole pinned. Cylinder #1 appears to be in overlap at TDC 1 and at TDC 2 cylinder #6 is in overlap. Yet a few of the adjustment screws cannot be backed off far enough to loosen the rocker. All the push rods are seated in the lifters. What do you guys think?