O
Old Goat
Latest activity Postings About
-
-
OUpdate on the swap, I was able to get it all put together after a few tough cross member bolts and about a day spent on getting the...
-
OAfter replacing multiple belt driven vacuum pumps, I deleted the vacuum pump, added a superduty dual pulley tensioner, replaced the...
-
OOld Goat reacted to Isaac Ristow's post in the thread Mechanical Water Temp Gauge Failure with
Like.
A mechanical temperature gauge is nothing more than a pressure gauge. The bulb the goes in the water jacket is usually filled with... -
OThis sounds like the issue. If you're not energizing the signal wire, it is not operating the solenoid which is what throws the bendix...
-
OOld Goat replied to the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else.The average go with the flow crowd just doesn`t get it. "You mean you drove that old truck all across the country? You shoulda rented a...
-
OOld Goat reacted to crazydane's post in the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else with Like.
Put a block under the rear wheel with the sticky parking brake and turned the other side with a torque wrench. About 150 lbs. ft to get...
-
OI'm curious about these things too, but I can answer #1.... The best way to pull it is to have a really good friend do it for you while...
-
OOld Goat replied to the thread So what did you do with your truck today?.Wonder if the oil leaked out of the Pump bearing? Love the smell of burning rubber...LOL Last sept at 3am 75 mile or so from home out...
-
OOld Goat replied to the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else.Wonder what kind of rodent c rap is under the intake manifold? When i was replacing the IP last July, decided to dig deeper and replace...
-
OOld Goat replied to the thread Trailered home a 1989 F350 dump truck that looks great on the outside, but the 7.3 IDI is something else.I pulled a 7.3 from PNP 3 years ago. Had front end damage to the L/F corner, but never touched the engine. Worked on it 3 days with a...
-
OAnyone know a part number for the flywheel housing out of a big International box truck that mates an IDI to an SAE pattern trans? Has...
-
OWell I'm sure you're right about the bearing but as far as the drag queen I have no favorite I have no least favorite. And I believe it...
-
OOld Goat replied to the thread "Snake Eyes" 1985 F350 Project Thread.You have come a long ways in almost a year with work and school. Mus be difficult to find good clean sheet metal living in the Rust...
-
OOld Goat replied to the thread 1990 7.3l idi f350 oil leak.FWRLRA has not been back since July 1, 24 Either fixed it or moved on by now. Welcome to the forum and thanks for the info. I have one...
-
OI recommend you get the EVTM, Electrical and Vacuum Troubleshooting Manual, for your vehicle. It won't help with the ambulance stuff...
-
-
Loading…
-
Loading…
