IdahoHillbilly
Registered User
Hi all, been looking at this truck for a while now. It is a 1994.5 and has been having random stall/no restart problems. Sometimes it would die and immediately restart, other times it would take a while and then restart (10 minutes or so). I did finally get it to give me a p0340 for the CPS. I replaced that and it was OK for a week or two and then died again. This time it had a p1212 and the p0340 in it. I tried swapping the CPS from my personal truck and still wouldn't start (would not start with ICP unplugged either). After sitting about 10 minutes, it started again. Figured I'd shotgun an IPR at it just because and now I'm getting a long crank... I figured it was air at first but I've driven it quite a bit today and its still cranking about 5-6 seconds. Any thoughts?
On a side note, i believe this truck is suppose to have an IPR with the "edge filter". I could not find one locally so I installed one without. I'm not sure what the function of that filter is... could that be my problem?
Thanks
On a side note, i believe this truck is suppose to have an IPR with the "edge filter". I could not find one locally so I installed one without. I'm not sure what the function of that filter is... could that be my problem?
Thanks