renjaminfrankln
Full Access Member
When I get the new intake finished i'll post some pics of that and the CDD push button glow plug setup. I had a small custom toggle switch panel made from wiringproducts.com for the glow plugs and cold advance.
Questions:
Anyone know what the 4 pin relay thing does on the IP wiring harness?
right now I’m basically reconstructing that harness. The glow plug wires melted the connector and the wires on the harness had been poorly spliced in several places. I made a switch panel in the cab for cold advance and a push button for the glow plugs. Not using the cold high-idle (solenoid broke and I do not need it). That relay I am guessing is just a switch for the cold circuit. But that wiring loom is so stout I can’t really pull the whole thing apart easily and trace the wires.
I assume that feeding the shutoff solenoid +12v allows the engine to run, and feeding the cold advance +12v turns that on as well
Looks incredible!wasn’t planning on it but even found time to wash/wax it today
Can't tell for sure but it looks like a clamp might be missing on the front end of the CDR tube, going into the front of the pump gear cover.
Seems to be pretty normal.It's there, just coated in black oil and blends in with the tube
What intercooler are you running?
it’s non intercooled