-
-
The other thing to keep in mind is that this isn't the same kind of galvanizing you see on car body sheet metal, or heater ducting... -
Noises come out, but I wouldn't call it preaching when that happens.
-
We got started blasting the frame today. I was hoping to get it blasted a couple weeks ago but the one guy didn't really want to do it...
-
The return goes to the oil tank, I only use the clean diesel for shut down so it doesn't take much. And like @IDIBRONCO said in...
-
The fits decent, what you would expect with a universal harness that covers three generations of truck. The wires hanging down are the...
-
Finished the rear harness of the truck and lighting. Everything works. Reviewed the diagram for the reverse lighting, spliced together a...
-
Picked up a decent condition bumper for the rear.
-
Selahdoor reacted to tvrrproto48's post in the thread 6.9 timing Where did the 8.5* come from with
Like.
Update, Ran a compression check. I have one cylinder at 395psi, 5 others between 415 to 420psi. Could not get the glow plugs out of the... -
I love those relays with the built-in fuse! :thumbsup:
-
Selahdoor reacted to Thelebowski's post in the thread The Official "Show Us Your Ride" pictures of member's trucks thread. with Like.
This here’s my 92 7.3 idi, n/a. Big thanks to this forum for helping me get it to where it is now. Got screwed on the deal initially, a...
-
When I get really motivated I'm going to check the harness between the radiator and the grill and see if by chance I see anything there...
-
I might "pay my dues to society" by putting a little extra diesel in the tank. Ill probably freeze to death this weekend, my contractor...
-
Selahdoor replied to the thread Jesus Freak's WMO tow truck.Makes total sense. You don't know what you don't know, so it's always good to ask! I'd test probe down at that foot switch. Figure out...
-
Selahdoor replied to the thread Jesus Freak's WMO tow truck.Run a whole new wire between the floor switch and the relay for the high beams. And you are welcome.
-
Bucks county PA DTI 3300 Magnetic Pulse Free Made a video if you want to learn yourself:
-
-
Loading…
-
Loading…
