so here it is,
all the parts for my 7.3 build.
garage clean.
parts laid out.
block is still a disaster, but i will remedy this tomorrow.
steam clean and air dry the block
take rods & crank down to machine shop, check rods for roundness.
clean and polish crank.
install new pistons
install rings
come home.
open beer.
look through the pics.
do any of you see anything im missing?
ITEMS KNOWN TO BE MISSING:
oil cooler tube- still in the cleaning process
pushrods- unsure of length needed
all the parts for my 7.3 build.
garage clean.
parts laid out.
block is still a disaster, but i will remedy this tomorrow.
steam clean and air dry the block
take rods & crank down to machine shop, check rods for roundness.
clean and polish crank.
install new pistons
install rings
come home.
open beer.
look through the pics.
do any of you see anything im missing?
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
ITEMS KNOWN TO BE MISSING:
oil cooler tube- still in the cleaning process
pushrods- unsure of length needed
Last edited: