not likely, i hadn't removed any in the first place. I may have bumped something stuffing my hands in there i suppose. Everything turns on and gp works, just no starter. I'll worry about that some other time should be easier for me to figure out.. I'm more curious on this clutch.
I actually never disconnected the slave. Not sure if I got the terms confused or what not but here's all i did: popped pin out of the master pushrod and slid pushrod off pedal, unbolted two bolts holding the master to the firewall, hung it up out of the way. fiddled around making brackets yada yada...bolted them to the firewall, bolted master to firewall, slid the pushrod back onto pedal and tried it.
it just sucks right to the floor, no pressure what so ever. The slave is and has been connected, pushing on the external clutch release lever feels normal, plenty of resistence there. But pushing the clutch pedal by hand back and fourth doesn't do anything to budge the slave.
I guess i'll take it back out tomorow and have a looksie. Maybe I nicked the boot where the pushrod goes in the master and just didn't notice. Would that cause this?