You must be registered for see images attach
You must be registered for see images attach
87 Crew Cab w/ 6 doors
- Thread starter IDIoit
- Start date
F350camper
BOOST!
KILLER!
bbjordan
Snow Monkey
That's pretty cool! How about a dark pic with gauges lit?
had to work too much today.
but i got the gauges mounted and senders in....
ill wire it tomorrow.
You must be registered for see images attach
You must be registered for see images attach
i am unhappy with the fact that i have to get a EV series isspro fuel gauge custom made
but it is what it is.
gauges are powered, and all wires ran minus the fuel wire and the 3 pigtails that clip into the senders.
ran outta steam tonight.
but i did blast a lill bit of chutes and ladders,
turned the running lights on, sparked one up and sat there in the dark.
and DAYMN those bagpipes sound amazing in here.
dialed in the gains and cross overs....
dont think im going to have it done this week, maybe next.
https://www.youtube.com/watch?v=ys3A_SMt1WY
Whats the blu ekg looking thingamajig in middle of dash
79jasper
Chickenhawk
Equalizer?
Looks like something for the radio.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Looks like something for the radio.
Sent from my SAMSUNG-SM-G935A using Tapatalk
yep its a 1/2 din 7 band EQ.
ran to a 500 W 4x and a 800 W x2
kicker 6.25" 2 ways up front, kicker 6x8's in the back.
and a set of kicker 10's
really wanted highs and mids up front, but didnt want to cut something for highs.
NO HEAD UNIT.
all ran via a blue tooth receiver from my phone.
ran to a 500 W 4x and a 800 W x2
kicker 6.25" 2 ways up front, kicker 6x8's in the back.
and a set of kicker 10's
really wanted highs and mids up front, but didnt want to cut something for highs.
NO HEAD UNIT.
all ran via a blue tooth receiver from my phone.
Last edited:
crash-harris
Breaker! Breaker!
As a sound engineer, I approve. I like to thump my folk metal too 
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
jwsfarrier
Full Access Member
loved the chutes and ladders!!! Forgot how much I liked that song. Good s--t! Great build man, keep up the good work!
everytime i turn around... parts parts parts.
turns out my clutch master leaks.
and my GPC still has a internal issue.
ordered both today.
my battery charger took a dump, so theres another thing i gotta buy.
i drained this group 31 so much that it wont even light off the amp anymore.
huge things to do this weekend.
i hope to get the brake lines done to the rear flex line.
i still need to pull rear axle and replace bearings and races.
drill a new vent hole, i covered up the old one in order to install the wishbone.
undecided if i want to do anything to the bed. its a temporary piece until my savings is back up to acceptable levels.
i dont want to cut up another bed and spend a day on it just to throw it to the side.
i want to build a bronco style bed for it, but i need the back piece of the 96 F350 in order to do what i want.
the head liner, im not too excited about, i have the CC headliner installed, and the new parts truck has a single cab brown headliner that im going to install until i find a blue one.
these headliners are expensive! so used **** it is.
the rear 2 seats are complete and bolted down ready to go. those stainless sill plates rock! i highly suggest them to anyone that likes a clean style interior
you can get the front 2 sill plates for 60 bucks on e-bay.
100 for crew cab.
gotta wait for a few items to come in before i install the front seat.
the goal is to get this damn truck out of the shop so i can paint the hood, and other items.
turns out my clutch master leaks.
and my GPC still has a internal issue.
ordered both today.
my battery charger took a dump, so theres another thing i gotta buy.
i drained this group 31 so much that it wont even light off the amp anymore.
huge things to do this weekend.
i hope to get the brake lines done to the rear flex line.
i still need to pull rear axle and replace bearings and races.
drill a new vent hole, i covered up the old one in order to install the wishbone.
undecided if i want to do anything to the bed. its a temporary piece until my savings is back up to acceptable levels.
i dont want to cut up another bed and spend a day on it just to throw it to the side.
i want to build a bronco style bed for it, but i need the back piece of the 96 F350 in order to do what i want.
the head liner, im not too excited about, i have the CC headliner installed, and the new parts truck has a single cab brown headliner that im going to install until i find a blue one.
these headliners are expensive! so used **** it is.
the rear 2 seats are complete and bolted down ready to go. those stainless sill plates rock! i highly suggest them to anyone that likes a clean style interior
you can get the front 2 sill plates for 60 bucks on e-bay.
100 for crew cab.
gotta wait for a few items to come in before i install the front seat.
the goal is to get this damn truck out of the shop so i can paint the hood, and other items.
The super fun task of brake lines!
You must be registered for see images attach
Similar threads
