-
-
GGreenie replied to the thread Another lift pump lets me down..My original mechanical lift pump lasted at least 220,000 miles. I replaced the original and the replacement pump has lasted for at least...
-
GGreenie replied to the thread Electrical smell and brake lights.Just to be safe - the cruise control switch on the brake line has been a recall issue for years. Have you had the recall work done or...
-
GGreenie replied to the thread E4OD won't move from stop in D.There's not much of a computer on these trucks - I used a Walmart purchased reader that plugs in under the hood and the flashes of the...
-
GSince the vehicle was off and burned the wire, you have a live short to ground. Install the inline fuse while replacing the wire. As...
-
GI’ve got two batteries now and the 35’s aren’t cheap. I wish the truck was stock hight with a leveling kit but whatever it came with a...
-
GAnother thing to check since you redid the whole thing. Make sure all your bleeders are positioned on top. If you get the calipers...
-
GGreenie replied to the thread Got me some tire chains.Good quality chains - with wear bars - are hard to find. I bought a great pair for 15" tires right off the shelf in Utah years ago and...
-
GGreenie replied to the thread Inline vs plug block heater.The block heater applies heat directly to the motor but the hose heaters aren't nearly as efficient since the radiator will waste a lot...
-
GGreenie replied to the thread Merry Christmas as well and a happy new year.Merry Christmas! "God Bless us everyone!" Tiny Tim, A Christmas Carol I too appreciate the information, help and kindness of the folks...
-
GGreenie replied to the thread Driver's door suddenly hard to close right.I used Dewhel pins from Amazon - there were two grooves for the C-clips the top groove was the right location for the F250. I also...
-
GGreenie replied to the thread Driver's door suddenly hard to close right.Follow-up... The hinge pins and bushings did take the play out of the door but the door still required a strong slam to close. A Dorman...
-
GYa I have torn a couple down. I always check/replace/clean/re-route the CDR first. I have never actually remedied a consumption issues...
-
GIf you don't have wheel bearing grease, Vaseline works pretty well too.
-
GSome of my aftermarket caps leaked. They were about .010" bigger on the inside that compressed the O-rings. Specifically the ones that...
-
Greplace cap, o rings, ensure that the hoses aren’t cut to a length that it puts pressure on the cap. Biggest reason they leak...
-
-
Loading…
-
Loading…
