Search results

  1. 9

    91 250 4x4 turbodiesel flatbed $2995

    1991 F250 4x4 with Banks turbo kit installed. Turbo rebuilt..no wastegate. Newer injector pump & fuel pump. 3 year old batteries. 2 year old alternator. 2 year old starter. 2 month old voltage regulator. 2 year old clutch & solid flywheel. Converted from auto to stick to avoid the E40 DOA...
  2. 9

    Retreads any good for IDI use?

    I have been running a set of ex-military goodyear 36's on my truck for about a year and it is about time to start looking for a different set. I have found it hard to locate 33"+ tall tires for my 16.5 rims under $180each. Was thinking I might try a set of retreads on the truck from one of...
  3. 9

    No Brakes !!! Hard pedal no power at all.

    This morning I drove my truck to the 1st stop sign like usual and coasted right through it. The pedal is hard and acts like it will stop the truck but the brakes have almost no affect on stoping the truck. I pulled the vacuum line that goes into the booster and it is making some vacuum but I...
  4. 9

    High pinion Dana60 King pin 4.10-1

    I have a front axle from an 89 F350 for sale. It is complete with steering and stabilizer minus only the calipers. 4.10-1 ratio with a matching rear axle from that truck. $1000 FIRM payable by credit card or cash only. no checks please. Might trade? but I doubt it. Thanks, Eric
  5. 9

    battery drainage again

    I am fighting a pesky battery drainage problem. Seems like I always have them :backoff I have the battery negative cables both disconnected. I have my digital voltmeter connected between the negative post and the negative cable. The voltmeter reads 12.54 -12.56 back and forth. I am going...
  6. 9

    How do I find an amp draw? my batteries dead.

    I had an issue with my A/C condenser leaking 134 so I parked the truck for about a week while I waited for the replacement to arrive. The condenser came in and I unbolted tha radiator and pulled it out then pulled the condenser out and replaced it. Then I reinstalled the radiator and filled...
  7. 9

    IP adjustment prior to installation ??

    ;Sweet I am planning to swap out my IP this holiday weekend and wondered if I can bump the fuel screw way up prior to installation to save a little hassle. I am changing the injectors also and will be running the stage 1's. I have the appropriate gauges so if I go too far then I can...
  8. 9

    hard starting on warm day/evening

    I have noticed that my truck will start up easily in the morning when it is cool outside but when I come out after work the truck just cranks and cranks and cranks. It is too warm for the glow plugs to cycle in the evening but in the morning it cycles and fires right up. If I shut it down after...
  9. 9

    installation instructions for injection pump?

    I am going to try installing a fuel injection pump on my 91 7.3 and wondered if anyone has the install instructions available for me. I have put PBblaster on all the fuel lines and bolts that I can see so hopefully everything will cooperate with me. I dont have a Haynes manual or anything...
  10. 9

    fuel injection replacement question

    If a fuel injection pump says it is for High Altitude that means it puts out less fuel to the injectors correct? I want to pick the correct unit that will give me the most fuel possible. I am in the midwest so altitude isnt an issue. I was shopping on Autozones website and they show a few...
  11. 9

    2 older ford diesels I spotted on the bay

    item # 4623267770 item # 4621491889 only one is an idi but both are worth a look... I have no affiliation with either unit, I just thought someone here might be interested in one. ;Sweet
  12. 9

    gooseneck height question

    I recently put a different flatbed on my truck and it rides about 5" taller at the deck than the previous bed. My question is how tall is too tall to use a gooseneck trailer? I am running 36 inch tires and now with the extra bed height I am nervous that I wont be able to pull a goose or 5th...
  13. 9

    converting bumperpull to gooseneck? possible?

    I have been looking for an enclosed trailer for pulling around my Jeep and dirtbikes to and from the woods. I really really want a gooseneck :love: :love: but all I can find in my price range right now are bumperpull stuff 24 ft. 26 ft 28 ft $3000-$4500 Is there any chance I can convert a...
  14. 9

    IDI towing opinions needed

    I know this isnt the towing forum but I actually want IDI drivers opinions so I will word it like this. Which trailer do you think will be better suited to pull behind my 91 7.3 idi ? :Sly ;Sweet I am stuck choosing between 4 trailer choices. 1997 24 foot enclosed w/ramp door &...
  15. 9

    Any pictures flatbeds running stacks out there?

    I have been trying to decide if I can live with just one stack or if I really must have the look of 2 stacks. I am running a flatbed and the plumbing is going to be a nightmare to route the drivers side stack and I will have to loose the underbed toolbox also on that side. The passenger side...
  16. 9

    Dana 60 single wheel front F350 axle

    I am selling my Dana 60 front axle on Ebay item # 8036975711 I put it on there with a buy it now of $975.00 and a starting bid of $800.00 with no reserve set so whoever bids may win. The axle has newer Milemarker lockouts and looks to be in good shape. 3.54-1 gear ratio balljoint axle from...
  17. 9

    2nd gear synchronizer replacement ??

    I have been having issues downshifting into 2nd gear from 3rd. I can get it to go into gear but not without grinding it badly. If I wait until I am going slow enough to shift into 1st it will go smoothly. No other gear gives me trouble but 3rd will make a clunk sound upshifting from 2nd but...
  18. 9

    adding another fuel tank?

    I have been looking for a way to add an extra fuel tank to my truck without using a tank on top of the flat bed. It had me thinking that maybe I could add another tank switch so that I could switch incab from one tank to another just like factory but have 3 tanks to choose from instead of 2. I...
  19. 9

    How wrong would stacking rear 2" blocks be?

    I am having a hell of a time finding a pair of factory 4" F350 blocks for my truck. I have found all kinds of junk aluminum blocks cookoo but I want them to be steel. I actually have 2" blocks from the factory and I have a set of 2-1/4" blocks in the shed and I cant help wonder if stacking...
  20. 9

    front F450 leaf springs different from F350 ??

    I am in the market for a set of leaf springs that are not sagging down like mine are now in the front. I would like to not need helper springs anymore. I was thinking that if I stuck a set of used F450 springs in there maybe I would even see 3-4 inches of lift on my truck. My questions...
  21. 9

    Shackle reversal possible on our trucks?

    I see that the later model trucks are reversing their shackles to improve the ride quality. I wonder if anyone makes a kit to do this to our trucks or if anyone has ever homemade their own kit. I am in the middle of getting all the parts together to swap in a Dana60 front axle and so while...
  22. 9

    Difference between Dana 60's 85-97 ??

    I have a neighbor in the market for a Dana 60 solid front axle. I have found several in the $750-$900 dollar range but they are listed in different years like they are different in some way. I just wonder what those differences are. I know the early 60's up to about 89 had kingpins instead of...
  23. 9

    F350 front leaf springs etc. wanted

    I am looking for a set of factory or aftermarket lift leaf springs from a 86-97 non superduty F350 1 ton pickup truck. I am also in the market for a trackbar from same truck. I may also be in the market for a pair of rear leaf springs. Hopefully the springs will come from a diesel motor truck...
  24. 9

    swap from TTB to solid D60 front axle ??

    The 1992 F-350 single wheel Dana60 I ordered came in today. I hoped it would have the tie rod assembly etc. but it isnt there. Can I use the TTB steering linkage ? Can I use the TTB track bar? What about the rubber brake lines? Is the front driveshaft the same? How about the front leaf...
  25. 9

    More Powerstroke Intercoolers available!!!

    I told you I would keep an eye peeled for them so here you go. ;Sweet Item # 8027672754 7.3 aluminum tanks 4 available $75.00 Item # 8027673759 7.3 plastic tanks 17 available $50.00 Item # 8027671450 6.0 plastic tanks 18 available $50.00 Item # 8027670558 6.6 Duramax all aluminum 11...

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,993
Members
24,115
Latest member
Tyler9828

Staff online

Members online

Total: 660 (members: 9, guests: 651)

Share this page

Top