Search results

  1. 1466IH

    Wiring Harness

    Looking for a good harness for the 89 in my sig. I need everything from the front bumper to the back of the cab. I am tired of constantly having problems with bad spots in the wires and trying to track down and patch also trying to figure out other peoples band-aids is a...
  2. 1466IH

    ZF5 and PTO

    Does anyone know what pto is required for the zf? I'm putting a bigger hydraulic crane on my truck and need a pto instead of the elec/hyd thats on it now. I dont really want a direct mount pump and would rather have the drop down to a pto shaft because then i can make a power divider to run...
  3. 1466IH

    What did everyone else do with their tax return

    So far i bought 2 new batteries(now it turns over fast enough i dont need ether), a starter solenoid(now i dont have to start with a screwdriver), new radio, wires and relays for the headlight mod, and just started pricing gauges on summits site but i didnt get that much back lol. I never...
  4. 1466IH

    wiring help

    hello all its been a while but im in a dilema im about 150 miles from home and need a schematic of the ignition module so i can see which wire to tie together to get this thing started the truck is my 89w/ e4od if that matters but local prts store says they cant have the new module till monday...
  5. 1466IH

    IDI Rally

    Is anyone from the Santa Rosa California area driving to the IDI Rally? Iam lookig at buying some parts from a fellow member and was wandering if anyone would want to make a few dollars delivering parts
  6. 1466IH

    hows everyone doing

    hey guys hows it goin been busy as he** around here with a new baby an all looks like i missed some neat stuff the ts thing sounds like it would have been fun. i got a new project now so i will be adding pics soon
  7. 1466IH

    HELP ELECTRICAL

    Does anyone have a wiring schematic that they could email i am having all kinds of issues. It all started with a melted headlight switch and now me radio keeps blowing fuses and now it comes on with my cab lights and i dont have tail lights. I have a new headlight switch and pigtail but when i...
  8. 1466IH

    Looking at a new truck

    Hello all. I have been a member of OB for a little bit now but am new to this side. As you can see in my sig is was with the ford guys but i am looking at a new truck. I am just wandering if there is anything to look for and check out besides the obvious before i purchase? It will deffinately...
  9. 1466IH

    Found a new ride

    It is an 89 crew cab dually the downfall is that it has a 460. How big of a deal is it to swap engines and put my 7.3 in. I did a search but the closest thing i found was a 7.3 and 351 swap. I thought i read somewhere that the 7.3 and 460 had the same motor mounts. they are both big blocks so i...
  10. 1466IH

    IDI Race Engine

    Just out if couriosity if money wasnt an object what kind of horse power can you get out of one of these engines. A friend of mine and i were talking and he is building a 68 Chevel and is gonna put a big block in it and i am trying to convince him to go diesel. I have seen some fummins engine at...
  11. 1466IH

    help truck wont stop

    1989 f350 new waster cyl and cant get brakes bled help
  12. 1466IH

    help truck wont stop

    1989 f350 new master cyl cant get brakes bled wont stop
  13. 1466IH

    Any IDI guys in or near St. Louis

    As you can all see i have A Lot of questions as i am new to these trucks really anything Ford for that matter. I am actually in Renault, Il which is about 30min southeast of STL but any help in the area would be great.
  14. 1466IH

    Looking at a new truck

    I am looking at a new to me truck on CL and I read somewhere on here that there are different frame widths between cab/chassis trucks and factory bed trucks. The reason i ask is because my truck has an autocrane bed and came as a cab/chassis and i would want to put my bed on the "new" truck...
  15. 1466IH

    E4OD and PTO

    Is it possible to put a PTO on an E4OD? If not what is my best bet for hydraulics
  16. 1466IH

    Homemade Turbo Kit

    I have been wanting to make my own turbo kit. I have a lot of stainless tubing and a bender so i was thinking of making a new set of headers that come up to the top of the engine and into the turbo. Does anyone have any ideas or suggestions? Has anyone done this before?
  17. 1466IH

    How to run WMO

    I am sure that you guys have gone over this many times but I am looking into running waste oil in my 7.3. I am on the fence about it and would like to know the pros and cons and how to do it. I tried doing a search for it and I dont know what I am doing wrong so if someone wouldnt mind either...
  18. 1466IH

    IH436

    has anyone ever tried putting an IH436 in a truck i have one setting on a pallet in the corner was always gonna save it for a pulling tractor but now that i have an idi i have my wheels turning. it it the same engine that came in a lot of tractors and the guys that pull with their 1066's and...
  19. 1466IH

    7.3 iDI wint start

    89 7.3 idi wont start lots of smoke so i would assume it has fuel give it a little either and all it does it spin a little faster
  20. 1466IH

    Hello

    Hello all I am pretty new to this site and new to the IDI so dont be too mean if i ask a couple of dumb questions. I have an '89 350 service truck have have the crane, welder, tools, etc so this thing weighs about 15820lbs according to the local elevator so i would like to do a few things to...

Latest posts

Forum statistics

Threads
91,306
Posts
1,130,045
Members
24,117
Latest member
olsen726

Members online

Total: 707 (members: 6, guests: 701)

Share this page

Top