nj_m715
Latest activity Postings About
-
-
nj_m715 replied to the thread Can’t get wheel lugs to seat.once you get them seated, be sure to re-tighten after a couple days of driving you may find a few loose ones -
nj_m715 replied to the thread Cracked Aux Tank!.can you braze? if not, try silver solder with a good acid flux you can get a little kit on amazon for 20 or 30 bucks rinse and flush...
-
-
nj_m715 replied to the thread Hey Cubey, mirrors!.https://www.amazon.com/Fit-System-H3551-Passenger-Replacement/dp/B001A0L940...
-
nj_m715 replied to the thread Hey Cubey, mirrors!.search for box truck mirrors you might find some hits
-
nj_m715 replied to the thread 16 extra gallons of fuel chevy side impact explosion tank.pretty much no changes to the factory set up, filling is normal I thought about tee-ing into the return line before the selector valve...
-
-
nj_m715 replied to the thread 16 extra gallons of fuel chevy side impact explosion tank.not much to see at this point, its pretty buried. had to jam the phone up into the fender for pics used a step bit to drill a hole just...
-
-
nj_m715 replied to the thread 16 extra gallons of fuel chevy side impact explosion tank.yeah, the stock front tank is still there, I'd love to have an oversize transfer flow front tank, but they are expensive and hard to...
-
nj_m715 posted the thread 16 extra gallons of fuel chevy side impact explosion tank in 6.9L IH & 7.3L IDI Diesels.cheaper option than aftermarket tanks this extra 16 gallons combined with my 38gal rear tank nearly doubles my range without losing any...
-
-
nj_m715 replied to the thread Acme Juicerator 'Fuge, General questions.years ago I bought one to build a wvo fuge but never did I had good luck pouring into a 55g drum through bag filters, heat and settle...
-
nj_m715 replied to the thread Worth patching this frame?.it's just the top, I'd be waaay moar worried about the sides I'd run it
-
nj_m715 replied to the thread Steering box adjustment.it's possible, I have done it but from what I've read, it's also possible to over tighten and bind the gears I made a small...
-
-
Loading…
-
Loading…
