icanfixall
Official GMM hand model
About a month ago I was up in Frisco having dinner and talking about my truck cowl vents. Someone without a name told me if they are plugged up I really need to fix that soon. "Just pull off the kick panel and remove the small cover. Thats all there is to it". Well now... Thats still stinking on the stable floor..... Someone forgot that I have an E4OD BTS and the drivers side is a pita to just get to that inner cover. The top bolts were way too close to the parking brake carrage so that needed to come off. The most long winded jam nuts on that thing... Gees. Then I had to remove the E4OD cpu. That was another pita too. Every screw, nut and bolt was hard from start to finish. So job done and I cleaned the electrical connections in the cpu with contact cleaner thats harmless to plastic..... But not the rubber seal... It puckered up enough that I felt it wouldn't fit correctly so... A little C A glue and its fine. So... In closing, don't think getting to the vent covers is an easy job.... Nope, its a real ****** thats for sure..... As for he who told me this was an easy job.... No hard feeling towards you... I'm just funnen with ya.....