hacked89
Full Access Member
I understand Chillman..sucks when people that don't have pride in their work touch your stuff.
By the way, if you ever need to plate the frame where the shackles are..take a Sawzall with atleast 12amp motor and a footlong diablo blade and you cut right through the rivets between the shackle mount and frame. Then punch them out quick with a sledge, weld plate, and back together.
I did that on mine.
Another thing im going to try on mine which I havent seen before, for S&G, is if you already have the rear tank dropped go from the inside and drill the plate out to allow the back of the rivets to go through flush. Then weld. And you get to keep the rivets.
The first way is easier if you have the tanks and everything in. If the second way doesn't make sense you'll see it soon in my thread.
Sent from my SM-G955U using Tapatalk
By the way, if you ever need to plate the frame where the shackles are..take a Sawzall with atleast 12amp motor and a footlong diablo blade and you cut right through the rivets between the shackle mount and frame. Then punch them out quick with a sledge, weld plate, and back together.
I did that on mine.
Another thing im going to try on mine which I havent seen before, for S&G, is if you already have the rear tank dropped go from the inside and drill the plate out to allow the back of the rivets to go through flush. Then weld. And you get to keep the rivets.
The first way is easier if you have the tanks and everything in. If the second way doesn't make sense you'll see it soon in my thread.
Sent from my SM-G955U using Tapatalk