IDIBRONCO
IDIBRONCO
This is why I wanted a slide in camper for years. Not my yard, this is just where I picked the camper up.
You must be registered for see images attach
Got a new toy for it today!
You must be registered for see images attach
It's going in Diego for right now, and hopefully I like the way it works enough to put another bracket and harness in Tank and pull out the leaky hydraulic controller.
Man those new controllers look sharp.Got a new toy for it today!
You must be registered for see images attach
It's going in Diego for right now, and hopefully I like the way it works enough to put another bracket and harness in Tank and pull out the leaky hydraulic controller.
I agree. I know that they were used for years, but I'm not sold on them.Those hydraulic ones are weird. I had one in my truck when I first got it
I like mine. It’s really smooth especially in traffic. Set it tighter than you would a time delay controller. It’s so smooth you’ll almost think it’s not doing anything. I probably run my trailer brakes tighter than I should though.Got a new toy for it today!
You must be registered for see images attach
It's going in Diego for right now, and hopefully I like the way it works enough to put another bracket and harness in Tank and pull out the leaky hydraulic controller.
How do you like those side mirrors? I'm thinking about going with that style so that I can see around my slide in camper a little bit better. Right now, I can see past it with only about half of the mirrors. I think that these will stick out a little bit farther.
How do you like those side mirrors? I'm thinking about going with that style so that I can see around my slide in camper a little bit better. Right now, I can see past it with only about half of the mirrors. I think that these will stick out a little bit farther.
It wasn't my IDI but I need to vent somewhere....
First off, my Father in law's truck (97 F350 ex U-Haul) is a big enough piece of junk as is and these half*censored* shops are just making it worse....
I went to change the rear shoes today. No problem right? First, the lug nuts on the driver's side were all loose, so naturally the rim is all egged out and the studs are all notched..... Great. He can't afford to fix it so change the brakes and put it back together.
Look up at the new spring hangers...... ........ What the.... Idiot that changed them notched the frame so he didn't have to drop the tank.... Oh yeah, and only 3 of the 4 bolts are there....
Front brakes are leaking too. We'll have to replace the lines.... Eventually.... When he has the money.
This thing is going to get him killed and these hacks are just making it worse.
This is why I avoid having anybody else work on my stuff if I can help it at all. Plus it's just one more check mark for owning an older truck like I do. I can still work on it without a degree in electrical engineering.It wasn't my IDI but I need to vent somewhere....
First off, my Father in law's truck (97 F350 ex U-Haul) is a big enough piece of junk as is and these half*censored* shops are just making it worse....
I went to change the rear shoes today. No problem right? First, the lug nuts on the driver's side were all loose, so naturally the rim is all egged out and the studs are all notched..... Great. He can't afford to fix it so change the brakes and put it back together.
Look up at the new spring hangers...... ........ What the.... Idiot that changed them notched the frame so he didn't have to drop the tank.... Oh yeah, and only 3 of the 4 bolts are there....
Front brakes are leaking too. We'll have to replace the lines.... Eventually.... When he has the money.
This thing is going to get him killed and these hacks are just making it worse.
I can mail you some free line if you need it for him. If you don't have time to flare send me the measurements and I can flare and mail them?
This is why I avoid having anybody else work on my stuff if I can help it at all. Plus it's just one more check mark for owning an older truck like I do. I can still work on it without a degree in electrical engineering.