-
-
ifrythings replied to the thread 7.3 idi throttle position sensor question.The reason I say don’t use the battery is because we don’t know if the ground to the TCM is good, if it’s bad and the TCM is “floating”... -
-
ifrythings replied to the thread 7.3 idi throttle position sensor question.Before you can fix anything you need to double check the vref voltage going to the sensor and make sure its right, if it’s truly 7.2v...
-
ifrythings replied to the thread 7.3 idi throttle position sensor question.Are you 100% sure you got 7.2v WOT? The tps is only fed 5v from the TECA/TCM, if your getting 7.2v then the 5v vref is way out of spec...
-
ifrythings replied to the thread Arduino Glow-plug Controller, Build & Walk-through.Just FYI, your going to smoke that INA226 on first power up, if you want to try a Hall effect sensor at least look at ACS772ECB-200...
-
ifrythings replied to the thread Arduino Glow-plug Controller, Build & Walk-through.I’m not sure exactly how you plan to use the ACS712 to measure glowplug current, it’s way too weak to even read one glowplug...
-
ifrythings replied to the thread Arduino Glow-plug Controller, Build & Walk-through.You have a great project idea but you need to back up a few steps and solve some major hurdles that you haven’t mentioned yet. What are...
-
-
Loading…
-
Loading…
