BioFarmer93
OPEC Hater
Hey Bill,
I run 2 Goldenrod filters, one just before the lift pump and one under the hood on the back side of the regular location. I got that black gravely stuff after taking on a load of fuel at Raceway- never purchased from them again. The Goldenrod filterhead is designed to be supported by hard piping, so a little rigging is called for since I'm not set up to weld aluminum. I ended up using a piece of 1/4" steel plate and drilling 2 holes in it to mount it to the frame, and cutting 2 slots in it to accept the SS hose clamps. Sounds sketchy but has worked fine for many thousands of miles. I check it every now and then just to keep an eye out for any wear. The one under the hood has a similar mount.
I run 2 Goldenrod filters, one just before the lift pump and one under the hood on the back side of the regular location. I got that black gravely stuff after taking on a load of fuel at Raceway- never purchased from them again. The Goldenrod filterhead is designed to be supported by hard piping, so a little rigging is called for since I'm not set up to weld aluminum. I ended up using a piece of 1/4" steel plate and drilling 2 holes in it to mount it to the frame, and cutting 2 slots in it to accept the SS hose clamps. Sounds sketchy but has worked fine for many thousands of miles. I check it every now and then just to keep an eye out for any wear. The one under the hood has a similar mount.
You must be registered for see images attach
You must be registered for see images attach