ah1988ford
Full Access Member
I just got my turbo back from the rebuild and I made a feed pipe that connects to the crossover pipe I welded it will I have issues with stuff cracking?
You must be registered for see images attach
It is not right. You have the two exhaust manifolds and only one is feeding the turbo while it goes out to the muffler (or where it would be). Both the exhaust manifolds feed the turbocharger. The output of the turbocharger exhaust goes to the down tube and out the muffler. LOOK AGAIN!
without knowing material or type of weld or rod grade. Best I can suggest is to start over. Once you have impurities in a weld its not likely you can "burn it out"...