swapping E4OD linkage?

[BIG DAVE]

How do I get these off so i can swap them over?
My new(to me) tranny is out of a 91 and here's the linkage (I don't know how to take it off)

You must be registered for see images attach

I need this one for my 92

You must be registered for see images attach

Thanks for any help

 

[J D Recovery]

are they the same trans? The lower one looks like my e4od and the top looks like a aod not sure tho.

 

[BIG DAVE]

are they the same trans? The lower one looks like my e4od and the top looks like a aod not sure tho.

Yeah it's an e4od they look the same just the linkage is different

 

[icanfixall]

I think your out of luck. From the pics I see no way of changing these levers unless you open up the trans. Sorry....

 

[david85]

Pan has to drop to swap the levers. There will be a nut on the insude and a dowel pin that has to be pulled out the through the pan gasket mating surface.
You will need a special hardened hook to pull that pin out (or make something if you can).

You must be registered for see images

You must be registered for see images

You must be registered for see images

http://www.thedieselgarage.com/projects/e4od/