9
94NAIDI
Latest activity Postings About
-
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.Unfortunately, I’m still not trouble free. With everything I have done so far, the tranny has never shifted and felt better than it does...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.I did drive the truck on an hour long trip today without the in line filter. The transmission shifted better than it ever has. No...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.Good to know. I believe they put those filters on to protect the new transmission from all the crap the old transmission may have spit...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.I did go ahead and remove the in line filter I found in the cooling lines. This thing was certainly causing a restriction. Was it...
-
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.Am I misunderstanding what the code 26 is? I thought it was Transmission Oil Temperature Sensor. If that’s the case, I am assuming that...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.I think my next step is to remove that in line filter and see what happens. Unless it has to be there.
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.I’m starting to think I got that code because it is only 10 degrees outside and I don’t think the tranny was warmed up. I will have to...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.Also. I noticed what appears to be an in line filter in the transmission cooling lines. Little thing about the size of an aftermarket...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.Rechecked fluid level. It is spot on. Cleaned both grounds from battery to engine. Found one ground from back of engine to body. Cleaned...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.It’s 10 degrees here today. Is it possible the code 26 was because the tranny fluid is not up operating temperatures?
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.Just tested the FIPL. It was at 1.35 volts at closed idle position. So I adjusted it to 1.193 volts. That’s the closest I could get it...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.Looking at the RPM sensor. The wires look good and the connector looks good. But there is what looks like possible oil fowling coming...
-
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.I did research the 23 code. Apparently you have to hold the throttle open during the test. Since I was by myself, I didn’t do that. So...
-
994NAIDI replied to the thread Another E4OD flashing OD light thread.I think I was successful in pulling codes using the paperclip jumper and test light method I found in another thread. I believe what I...
-
994NAIDI replied to the thread 7.3 IDI intake valve needed.I haven’t checked lately. So I’m not sure if the market has got them back in stock or not. I appreciate the offer to help. But I ended...
-
-
Loading…
-
Loading…
