Drew2010
Full Access Member
Well guys I am working on my engine that I will be swapping in this winter. I got Russ' cam in today, and I was putting the pushrods and rockers back. I put the Timing mark at 11:00 position and tightened down the bolts, well after I was done I have about 3 or 4 loose rockers, And i mean pretty loose.
Could it be the lifters on those just aren't pumped up, causing them to be loose?
I have had the pushrods out for probably about 3 weeks or so, so could these problem rockers just be a result of a bled down lifter?
And before you ask, yes I put the rockers and pushrods and lifters in the same spot, with the lifter hold down dimples up.
Could it be the lifters on those just aren't pumped up, causing them to be loose?
I have had the pushrods out for probably about 3 weeks or so, so could these problem rockers just be a result of a bled down lifter?
And before you ask, yes I put the rockers and pushrods and lifters in the same spot, with the lifter hold down dimples up.