finally getting somewhere. went out and picked up shorter bags, may eventually go with even shorter ones, but going to give these a try and see how they work. got the bags installed, reconfigured my upper bag mount and got it bolted in. everything looks much better now.
You must be registered for see images
then got the level valve mounted and plumbed on the crossmember. had to tweak the arm to get it lines up where i want. the lower mount will get made and bolted to the rear utilizing the diff cover bolts.
You must be registered for see images
bag bottoms sit much higher now. very happy with this.
You must be registered for see images
only issue i have ran into which isnt really an issue, i need to install shims to rock the pinion back down. right now its dead straight into the shaft.
You must be registered for see images