Dude at autozone told me I wouldn’t be able to find a replacement part for it. So actually super helpful answer thanks. I hit it with a torch a few times and it’s in there pretty tight but good to know I have a backup if I can’t get it outI'm not exactly sure what you are asking. You should be able to get a replacement fitting though. Tell the parts store it's a heater hose fitting.
It should go to the heater core.
You can get that one out with some heat.
Sent from my SM-N960U using Tapatalk
It is 1/2npt 5/8 hose barb
Vacuum pump figured it out.Everything’s looking good with the water pump.
My brake is super still. I’ll do the pump it up start the car trick and it’ll be normal then seize up and be super stiff. Do I just need to bleed the brakes? I don’t think there are any air bubbles but the fluid is decently dirty.
Sent from my iPhone using Tapatalk
I'm glad that you figured this out. This is why I always recommend a vacuum gauge. It's nice to be able to keep an eye on the health of the vacuum pump.Vacuum pump figured it out.
Sent from my iPhone using Tapatalk