Front Braided Lines

[Scotty4]

My line are routed as such, the front brake are from master to drive hose and then teed to pass hose. As for the rear, there was rabs but that ended up in the scrap pile. So omitted one line from the ss hard line kit I got from inlines for a union, in turn rear is straght to the rear hose that gets teed on the axle side.

Thanks. Odd why @ISPKI would have it different, his truck being a 94.

 

[1mouse3]

Thanks. Odd why @ISPKI would have it different, his truck being a 94.

Not sure that, going through rockauto it is showing a teed hose on the drive for 92-97.

 

[ISPKI]

So mine do have a "T" inside the frame. The line comes down from the master to the "T" inside the frame on the driver side, then branch to the caliper on the DS and over to the PS.

Rear goes to the T junction, again inside the frame, then branch from that to the calipers on the wheels.

The picture above just looked odd to me because I assumed there was a line feeding the junction from inside the frame like my truck.