clutch pedal bushings

[zpd307]

are the clutch/brake pedal bushings for the 92 on up the same for 87-91? i checked the parts bin for the part # and it stated it was for 92-94. the online ford parts store doesnt list for what years it is for.

 

[towcat]

are the clutch/brake pedal bushings for the 92 on up the same for 87-91? i checked the parts bin for the part # and it stated it was for 92-94. the online ford parts store doesnt list for what years it is for.

92 and up is a completely different animal. I thought the part numbers for the 87-91 were there. lemme check. brb.

 

[zpd307]

the bushing for the master cyl arm is there, but not the brake/ clutch pedal bushing. you wouldnt hapen to have that number, would ya?

 

[towcat]

the bushing for the master cyl arm is there, but not the brake/ clutch pedal bushing. you wouldnt hapen to have that number, would ya?

it's over at my personal shop.
I will check in a little bit.

 

[zpd307]

thanks, i figured i get them ordered up. i have to push the pedal way to the floor to get it to disengage. i remembered having to press the pedal a little to get the pivot and master cyl linkage to come together. then i read up on reclocking the splines on the pivot. when i was trying to pry of the pivot, while in the truck, pita and a no go, i noticed that there was some play in the shaft. hopefully all of this will cure that. i thought the bushings looked good before i put it together, the bushing holes in the housing werent hogged out. oh well.

 

[towcat]

I thought I had a set on the shelf, but I didn't. will check with my grumpy parts guy tomorrow.

 

[sle2115]

Could probably use the drill down menu at Titus Will online as well, or email them, they'll give you the number.