turbo

  1. S

    Powerstroke 2 IDI no Turbo conversion

    I am running an '94 Eco IDI w/o turbo. My first IDI broke down some year ago and I still have this motor sitting here. The engine had a problem with the oil pump and it ran dry. Crank shaft, some rods and pistons changed color. Problem here in Europe is the limited availability of spares for...
  2. Minuteman96

    Borg Warner turbo that will bolt into a Sidewinder kit

    I have a wastegated Banks Sidewinder that had shaft play so I tore it down. Was going to rebuild it myself, but finding a kit is a bear. I’ve read the wastegated sidewinders were all TE06H’s but the label on my turbo got ripped off before I acquired it. The motor is a stock 94 7.3 in a 93 F250...
  3. Minty Ferd

    Secondary oil circuit for turbos?

    I'm working on getting twin turbos on my 89 7.3 idi. And I'm thinking instead of using the engine oil, I could make a secondary oil system just for the turbos. For that I would just need a oil pump capable of constant pumping, a oil reservoir, some oil lines, and a switch. The advantage would be...
  4. Nick382

    7.3 IDI Turbo kit: ATS093 components w/ NEW CHRA, intercooler, Auber 2813, and more

    Hello everyone, I've went an entirely different direction with my vehicles, and no longer have use for the turbo components I've collected over the years. I tried to acquire the best that I could afford, and have quite a few things to pass on to the next lucky person as an entire kit. 1. New...
    • Nick382
    • Thread
    • ats ats turbo intercooler kit turbo
    • Replies: 5
    • Forum: Marketplace
  5. D

    Compressor Maps at low RPM

    Gents, I'm pulling out my hair trying to understand something here, and I'm hoping someone can help. I've started looking at turbo upgrades, and therefore had to look up compressor maps. I believe I understand how they work, and I've followed several tutorials for plotting on maps to determine...
  6. Minty Ferd

    Twin Turbo setup 7.3idi

    I'm thinking about doing a twin turbo set up on my 7.3 idi. As of now I have true duals that run to the back of the cab and go up though the flatbed. They are attached to the headache rack and are capped with a rain cap. I have this old rusted out toolbox right next to were the two pipes turn...
  7. D

    OM606 swap questions

    So it looks like the NA 606 has a mechanical injection pump. So if I had a car that came with a na 606 would a turbo 606 be a direct swap. I would convert the electronic 606 to a mechanical pump. Or would it be easier to get a car that already has a turbo 606 and convert it to mechanical. The...
  8. Kraig

    3 trucks to make one!

    Hey all. I have what is a question of experience or possibly legality. I purchased a 4x4 powerstroke just for the engine this summer. It's wrecked but he's a good title. Now, I just purchased two other f250s. One is a 4x4 1990 NA IDI with welding body and a factory dually conversion. This...
  9. ISPKI

    Where to thread in pyrometer probe

    Hey all. I am looking at replacing my IP on my 94 F250. Guessing its original and its giving me issues hot starting (as in, truck cant start at all when hot). I was looking at CDD and R&D's slightly higher flow pumps as I am intending to put a banks turbo on it eventually. For that, I figured...
  10. 03wr250f

    Babe The Blue Ox

    I just wanted to do a thread on babe the blue ox, so figured I would show my truck off! 1989 f250 7.3 idi zf5 4.10 as it sits now and any questions about previous setups just ask R&d cold air intake, 3'' dp, stage 3 fuel system, stage 1 drop in turbo, stage 1 injectors, stage 1 cam, return...
  11. D

    Sxe362 s467 compound turbo setup?

    Has anyone used a s467 as the big turbo in a compound setup. How did it spool and what king of power can it support.
  12. 9

    93 turbo cdr Does the cdr

    Is the cdr valve on my 93 7.3 turbo idi supposed to keep oil from entering the turbo,oil pooling at opening to turbo
  13. Natehimself36

    Build Thread 250 XLT 7.3 IDIT

    I’m starting this build thread a little late. Better late than never i reckon. This is my 1993 F-250 XLT 7.3IDI. It had 198,*** miles on it when i destroyed the engine. I’m not too sure why the engine did what it did. I thought i detected an extremely light, hard to hear knock for about a year...
  14. R

    Possible Exhaust or Turbo Issue - 94 7.3 IDI Factory Turbo F250

    This is my first post on forum, but I have lurked for awhile. Apologies if I missed a similar post on the issue. Vehicle is a 94 F250 with factory turbo 7.3 IDI I went to start my truck yesterday. First start since the temperature dropped here over the weekend. It started right up but a second...
  15. ComatoseLlama

    89 7.3 banks sidewinder turbo kit upgrades?

    Got my 89 f350 custom cclb 7.3 a few months ago and have been wondering if there are any turbo wheel upgrades for my banks kit? Website and support say it's designed for high rpm, high stress engagement. It is the old school sidewinder kit with the big aluminum intake so nothing on the banks...
  16. P

    NEW DB2 PUMP

    Question for Wes, or whom ever, maybe of some general interest. Friend has new in wrap from FORD a db2-4821 for couple hundred. Is this a 8cyl x 4 x .21 plunger pump? Too much to use as just a core so would it flow significantly more than my current, no problems, db2831? Also have a spare...
  17. Torinojts

    TURBO COMPRESSOR HOUSING...OOPS

    A friend of mine has a valve cover leaking bad on the passenger side under the turbo on a stock IDIT. he called me up to come over and help remove the turbo as he said it was stuck (not very well mechanically inclined). I would not make it to his place for several days so he tried to remove it...
  18. CampulanceMan

    Hypermax Turbo Install

    Hi Everyone, I'm brand new to the forum and pretty new to trucks in general as well. Earlier this year I became the owner of a 1993 F-350 Ambulance with the 7.3 IDI, that has already been converted into a camper. Truck is great with basically no rust (from the desert) and low miles, but it's...
  19. dkleind0110

    Found Banks 1st Gen COMPLETE Install Packet + Paraphernalia

    Been a lurker for a long time, finally have something worth posting. Purchased my truck from 1st owner and he had the installation packet from when he put it on the truck himself! Lost it in a move, and just found it again. I know how difficult it is to find stuff for our old turbo kits on...
  20. C

    Which Rear Axle Ratio? (31ft MH, 7.3idi turbo, Allison 1000)

    Hello, I'm slowly coming along with my project, but in the near future I have to decide which rear axle ratio will be installed. My Setup: 31ft Airstream 310 Motorhome Max. 14500lb., Dana 70HD Axle, 7.3idi with Hypermaxx turbo. (Rebuilt is planned, I will consult the forum, right now the plan...
  21. C

    7.3 Garrett turbo verification

    need help indenturing my turbo I’ve owned it a week and have not been able to track down a name for it. Is a Garrett sir research, industrial division (if that matters). Serial no. Is RB0397 L Part no. Is 408105-5119 Any help would be greatly appreciated so I can go forward with finding out if...
  22. S

    o-ring size between turbo and snail?

    Does anyone know a part number or size of the oil ring between the turbo and the snail? The turbo is an ATS Aurora 2000, which might be the same housing as the 093. I had oil residue around the turbo and snail, wrapped some silicone tape around all the connections to seal them up, and found...
  23. N

    Wanting to put a turbo on my 85 350

    So I have an 85 Ford 350 6.9 ambulance with 60,000 miles on it! It drives amazing down the highway until I hit a steep hill then I bog down hard.. looking to get more hp and torque out of her would you guys recommend a turbo if so what all should I consider before I put on one? If anyone has any...
  24. Dregs Garage

    1994 Ford f350 4x4 7.3 IDI turbo 5speed

    Hi, I have a 1994 f350 crew, longbed for sale was white and red, has older white repaint, has red interior with bench seats. Body is good bed is dented, Had goose neck in bed Missing tailgate. It was running before winter and has been sitting since October, I was swapping out the injection...
    • Dregs Garage
    • Thread
    • 4x4 5speed 7.3 7.3 idi crewcab long box longbed project turbo zf5
    • Replies: 2
    • Forum: Marketplace
  25. ocnorb

    Altitude affecting Turbo IDIT causing smoke?

    I picked up a '94 IDIT last week. Bone stock. The altitude where I did my test drive was 157' asl. Could not make it smoke. Drove it home 870 miles with a big grin on my face. Averaged 15.7 mpg, which isn't too bad considering the bed was loaded and the speed was 80-82mph for most of the trip...

Latest posts

Forum statistics

Threads
91,282
Posts
1,129,777
Members
24,099
Latest member
IDIBronco86

Members online

Total: 990 (members: 10, guests: 980)

Share this page

Top