Search results

  1. '94IDITurbo7.3

    Superduty Lift Pump & Dual Filters

    That is correct
  2. '94IDITurbo7.3

    Superduty Lift Pump & Dual Filters

    It's been a while since I've been on here haha. So for those that forgot or those that are new I'll re-cap......a couple years ago i got rid of my factory lift pump in favor of an electric one. I decided on a stock 7.3 sd pump. Well since it pushes way more fuel than our injection pumps like i...
  3. '94IDITurbo7.3

    Got a turbo kit, some questions and install thread

    Lengthen wastegate rod for less boost.
  4. '94IDITurbo7.3

    Leaking Boost into Crankcase

    That thought had crossed my mind.
  5. '94IDITurbo7.3

    Leaking Boost into Crankcase

    I think I will either buy or make a boost leak tester and check to see if this manifold work has done anything at all. If it still leaks like before I will take a video so you guys can see just how fast it leaks.
  6. '94IDITurbo7.3

    Leaking Boost into Crankcase

    I was low on boost and I was leaking around my compressor housing. I took that off and resealed it. Then rechecked it to make sure I had that fixed(which I did). Hook the air up to the boost leak tester, pump up to about 20psi, take air chuck off and it drops down to about 5-10psi of pressure...
  7. '94IDITurbo7.3

    Leaking Boost into Crankcase

    Yes engine was off for smoke test. And the engine runs great otherwise.
  8. '94IDITurbo7.3

    Leaking Boost into Crankcase

    i hooked a smoke machine up to a boost leak tester connected to the compressor housing on the turbo and was instantly getting smoke out the CDR tube and out the engine oil dip stick tube.
  9. '94IDITurbo7.3

    Leaking Boost into Crankcase

    i am leaking boost into my crankcase. had the intake mani checked and found .004" warpage at one end, gonna have that fixed but machinst doesn't think that is the entire issue and neither do i. i would think that gap would be taken up once the gasket is in there and the mani is torqued down...
  10. '94IDITurbo7.3

    IDI 0-60 Times

    I think last summer sometime i ran like a 10.8 0-60 time....that was getting on it hard from a dig but not WOT from a dig, then just matting it once i got rolling. factory turbo with 3" exh outlet, 3" DP, 60-1 cold wheel, 4" intake, R&D IDI 90cc pump and efuel. that was running with a massive...
  11. '94IDITurbo7.3

    Ats turbo blanket?

    any T3 turbo blanket will work as the ATS 093 is a t3 turbo.
  12. '94IDITurbo7.3

    Finished Turbo Install

    these turbos are T3
  13. '94IDITurbo7.3

    Why No Turbo Whistle

    I ran mine with just rhe the downpipe dumping out....holy mother of gawd whistle
  14. '94IDITurbo7.3

    Headlight relay kit

    Yup. Waited I think like 2 or 3 months on them...not a single word from them. Ended up just cancelling the order. Still haven't got around to doing the relays.
  15. '94IDITurbo7.3

    a drop-in lighting option for bullnose (80-86) trucks.

    My. Rigid fogs can. Be on all day and do not even get warm
  16. '94IDITurbo7.3

    stacks or regular 4in exhaust?

    who?
  17. '94IDITurbo7.3

    1994 idi turbo Tranny dipstick

    don't hold me to this as i am going off of pics, but i think the psd stick is different.....the stick on my idi turbo comes up around the fuel filter and i just looked at a pic of a psd and it come up over the back of the pass side valve cover.
  18. '94IDITurbo7.3

    1994 idi turbo Tranny dipstick

    yeah, the factory turbo dip sticks are now obsolete so your only gonna be able to get a NOS one or a used one. good luck.
  19. '94IDITurbo7.3

    stacks or regular 4in exhaust?

    single 5" straight pipe factory routing. Will sound nasty as sheet on a turbo idi. i did 4 inch straight on mine and i wish i had gone 5 inch. it would have been tight with my 2wd though haha, but 4x4 trucks should have zero clearance issue with a good exhaust kit.
  20. '94IDITurbo7.3

    Rear disc and axle upgrades for our trucks?

    Need to reposition the spring perches and shock mounts as well....but I have seen drilling the hubs for our pattern done.
  21. '94IDITurbo7.3

    Rear disc and axle upgrades for our trucks?

    I'll just leave this here.....http://www.fordmann.com/F350.rear_disc_brakes.htm seems like the best way to keep the sterling 10.25, keep the parking break, keep your obs bolt pattern, and have BRAKES THAT ARE RATED FOR THE LOADS THESE TRUCKS HAUL!!!!
  22. '94IDITurbo7.3

    4 BRAND NEW Alcoa wheels for sale in SoCal

    er ma gerd!!!!!!
  23. '94IDITurbo7.3

    winter front

    cardboard don't work...ask me how i know lol
  24. '94IDITurbo7.3

    92 f350 build thread

    looking forward to results on the pump! good looking work man!
  25. '94IDITurbo7.3

    Turbo upgrade?

    Sounds like the turbo is out of its map if it is surging like that....egts seem hot for that speed and boost as well.

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,785
Members
24,099
Latest member
IDIBronco86

Members online

Total: 796 (members: 6, guests: 790)

Share this page

Top