Cleaning out the IDI Monster Garage!

[payableondeath6]

Sounds good on the senders, it may be a wile till I have them out.
On the PS Pump I will give you what I have. I think one has the lines still hooked up so you can have that one.
No Idea on the mileage of the pumps but they worked when removed. If you get something and you aren't happy with I will give you your money back. No problem.

Sounds great to me, last question before I paypal you tomorrow (I promise ), you have any cab mounts? I want the part that actually is on the frame...the "frame bracket" part here:

You must be registered for see images attach

I just need two.

 

[Darrin Tosh]

hey darrin,
i forgot, i'm also looking for a complete cruise package . i have everything inside- need everything outside. that is, if you end up with parts
chris

The 86 has evertyhing for the cruise so I am shure we can work that out. I will let you know!

I looked today and I think I have what you need sitting on the shelf for the Cruise Control I will take pics and show you what I have tomorrow.

 

[Darrin Tosh]

Nice PIC, did yo do that yourself?

I think the cab mounts are good on the cab and chassie but It would be too much of a hassle removing them. Especally if no one buys the cab. But if that happens I will let you know. So I guess what are they worth?

 

[Darrin Tosh]

Hey Darrin, I forgot.
I also need a timing cover for a tach sender (would be nice to have the sender as well).

I missed that earlier, I think I have a sender and I know I have the timing covers, $20.00 shipped for the cover and if I have a sender I will give it to you, pretty shure I have one.

 

[payableondeath6]

Nice PIC, did yo do that yourself?

I think the cab mounts are good on the cab and chassie but It would be too much of a hassle removing them. Especally if no one buys the cab. But if that happens I will let you know. So I guess what are they worth?

Nah, found the pic on Google. Don't worry about it if you don't already have some off, just thought with all the work you've done on Big Ed and the big parts pile you may have some laying around. If I end up needing some I can build them or cut and move mine

So you should be seeing some Paypal in your account as of now Just let me know when you get it shipped so I can know when to expect it, no rush at all.

 

[Darrin Tosh]

Got it boxed up and sitting on my desk should get it out today, I will let you know.

 

[slideordie]

do u have any ac parts for me to convert my truck over to 134a from r12? i dunno what that takes but im interested. also since i have an 86 and it has the stock glow plug setup if u would have the wiring and what not i could use to convert it over?

 

[slideordie]

are things still for sale?

 

[fireman438]

Hey slide, converting from R12 to 134A is easy!! It will take a bit of elbow grease and a trip to a certified a/c guy, but no "conversion" parts.

Procedure: Replace all o-rings @ the hose connections in the system, replace the receiver/dryer, take rig to shop for a/c system flush (to remove any residual R12 and any other contaminants in the system), replace the compressor oil with 134A-compatible oil (the tech should know to do this), charge the system, and viola! you have a 134A a/c system.

P.S. you may need to replace the pressure switch to a lower pressure unit due to the lower pressure that 134A runs at.

Hope this helps!!

Rich

 

[Darrin Tosh]

do u have any ac parts for me to convert my truck over to 134a from r12? i dunno what that takes but im interested. also since i have an 86 and it has the stock glow plug setup if u would have the wiring and what not i could use to convert it over?

What RIch said is the way to doit. You can get the parts from Napa. Or do what I did and boutght a retro fit kit from Meyjers. I think any major store has them. You just replace the fittings, they screw on the old fittings, and fill it up with the retro fit oil and a couple of cans of R134. I did this with my truck 4 years ago. I have to put in a new can or 2 every year but it works. and only about $45.00

Do you need a 6.9 glow plug wiring, or 7.3? I do have 7.3 wiring harness along with the controllers. Let me know.

 

[Darrin Tosh]

Also, that PS pump I'm getting, you happen to have some good condition hoses for it? Just in case I find more than the pump is leakin.

I got the PS Pump sent out to you today UPS should be there by Thursday!

Thanks!

 

[RLDSL]

Do I see a set of permanent wheel balancers in there?
If those things fit a dually, how much do you want for them?

--------Robert

 

[payableondeath6]

I got the PS Pump sent out to you today UPS should be there by Thursday!

Thanks!

Great I'll let you know when I get it.

 

[Darrin Tosh]

Do I see a set of permanent wheel balancers in there?
If those things fit a dually, how much do you want for them?

--------Robert

Yes, good eye, they didn't come off a dually they came off a SRW. I don't know if they are the same or not. If you want them figure $85.00 shipped.

I can get you a better pic if you want, just let me know.

 

[RLDSL]

Yes, good eye, they didn't come off a dually they came off a SRW. I don't know if they are the same or not. If you want them figure $85.00 shipped.

I can get you a better pic if you want, just let me know.

If you can get a better picture and maybe find a manufacturer name or part number on one of them, I might be able to chase the application interchange down.

Thanks----Robert